|
|
SERVICE DATA AND SPECIFICATIONS (SDS) CL-15 D E F G H I J K L M A B CL SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030 Clutch Control System ECS007H3 Clutch Master Cylinder (with clutch damper) ECS007H4 Clutch Operating Cylinder ECS007H5 Clutch Disc ECS007H6 Unit: mm (in) Clutch Cover ECS007H7 Unit: mm (in) Clutch Pedal ECS007H8 Unit: mm (in) *: Measured from surface of dash lower panel to pedal pad. Type of clutch control Hydraulic Inner diameter 15.87 mm (5/8 in) Inner diameter 19.05 mm (3/4 in) Model 240 250 250 Engine KA24DE VG33E VG33ER Facing size 240 x 150 x 3.5 (9.45 x 5.91 x 0.138) 250 x 160 x 3.5 (9.84 x 6.30 x 0.138) 250 x 160 x 3.5 (9.84 x 6.30 x 0.138) Thickness of disc assembly with load 7.75 - 8.25 (0.305 - 0.3248) with 4,903 N (500 kg, 1,103 lb) 8.1 - 8.5 (0.3189 - 0.3346) with 6,473 N (660 kg, 1,455 lb) 8.1 - 8.5 (0.3189 - 0.3346) with 4,903 N (500 kg, 1,103 lb) Wear limit of facing surface to rivet head 0.3 (0.012) 0.3 (0.012) 0.3 (0.012) Runout limit of facing 1.0 (0.039) 1.0 (0.039) 1.0 (0.039) Distance of runout check point (from hub center) 115 (4.53) 120 (4.72) 120 (4.72) Maximum backlash of spline (at outer edge of disc) 1.0 (0.039) 1.0 (0.039) 1.0 (0.039) Engine KA24DE VG33E VG33ER Model 240 250 250 Set-load 2WD 4,903 N (500 kg, 1,103 lb) 6,473 N (660 kg, 1,455 lb) 7,355 N (750 kg, 1,653 lb) 4WD — 6,473 N (660 kg, 1,455 lb) 7,355 N (750 kg, 1,653 lb) Diaphragm spring height 37.5 - 39.5 (1.476 - 1.555) 36.5 - 38.5 (1.437 - 1.516) 37 - 39 (1.457 - 1.535) Uneven limit of diaphragm spring toe height 0.7 (0.028) 0.5 (0.020) 0.7 (0.028) Clearance between pedal stopper bracket and clutch interlock 0.1 - 1.0 (0.004 - 0.039) |