|
|
REMOVAL AND INSTALLATION AT-65 [RL4R01A] D E F G H I J K L M A B AT 4. Install the rear plate. 5. Tighten bolts securing transmission. 6. Installation of the remaining components is in the reverse order 7. Adjust control cable. Refer to AT-61, "Control Cable Adjustment" . 8. Adjust throttle wire. Refer to AT-60, "Throttle Wire Adjustment" 9. Adjust PNP switch. Refer to AT-60, "Park/Neutral Position (PNP) 10. Refill transmission with ATF and check fluid level. mission operates correctly. 12. Perform road test. Refer to Rear plate bolts 10 mm 3-4 Nm (0.3-0.4 kg-m, 32- 14 mm 16-22 Nm (1.6 2.2kg-m, 12- LBIA0363E Bolt No. Tightening torque N·m (kg-m, ft-lb) Bolt length “ ” mm (in) 1 39 - 49 (4.0 - 5.0, 29 - 36) 43 (1.69) 2 3 - 4 (0.3 - 0.4, 2.2 - 2.9) 16 (0.63) 3 16 - 22 (1.6 - 2.2, 12 - 16) 16 (0.63) AAT153A SAT638A |