|
|
MWI DIAGNOSIS SYSTEM (METER) MWI-23 < FUNCTION DIAGNOSIS > C D E F G H I J K L M B A O P DIAGNOSIS SYSTEM (METER) Diagnosis Description INFOID:0000000001702262 SELF-DIAGNOSIS MODE The following items can be checked during Combination Meter Self-Diagnosis Mode. OPERATION PROCEDURE NOTE: Combination meter self-diagnosis mode will exit upon turning the ignition switch to OFF or ACC. • If the diagnosis function is activated with trip A displayed, the mileage on trip A is reset to 0000.0. (Trip B operates the same way.) To initiate combination meter self-diagnosis mode, refer to the following procedure. Turn the ignition switch ON, while pressing the odometer/trip meter switch for 5 - 8 seconds. When the NOTE: MWI-29, "COMBINATION METER : Diagnosis Procedure" . Replace combination meter if normal. Refer to MWI-94, "Removal and Installation" . COMBINATION METER SELF-DIAGNOSIS MODE FUNCTIONS To interpret combination meter self-diagnosis mode functions, refer to the following table. Event Odometer Display Description of Test/Data Notes: Odometer/trip meter A/B tESt Initiating self-diagnosis mode Switch released GAGE Performs sweep of all Gauges sweep within 10 seconds Switch pressed (All segments illuminated) Lights all LCD segments. USA Canada Switch pressed bulb Illuminates all micro-con- Part may not be configured for all Switch pressed r XXXX, FAIL Return to normal opera- If a malfunction exists, “FAIL” will AWNIA0219ZZ AWNIA0220ZZ |