|
|
GI-48 < BASIC INSPECTION > SERVICE INFORMATION FOR ELECTRICAL INCIDENT • Do not apply excessive shock to the control unit by dropping or hit- ting it. • Be careful to prevent condensation in the control unit due to rapid temperature changes and do not let water or rain get on it. If water • Be careful not to let oil to get on the control unit connector. and lower covers. • When using a DMM, be careful not to let test probes get close to each other to prevent the power transistor in the control unit from • When checking input and output signals of the control unit, use the specified check adapter. How to Check Terminal INFOID:0000000001729588 CONNECTOR AND TERMINAL PIN KIT • Use the connector and terminal pin kits listed below when replacing connectors or terminals. and terminals. For detailed connector and terminal pin replacement procedures, refer to the latest NISSAN/ SAIA0255E SEF348N |