|
|
FRONT DOOR GLASS AND REGULATOR GW-57 C D E F G H J K L M A B GW 2006 Pathfinder FRONT DOOR GLASS AND REGULATOR PFP:80300 Front Door Glass EIS007S0 REMOVAL 1. Remove the front door finisher. Refer to . 2. Temporarily reconnect the power window switch. 3. Operate the power window main switch to raise/lower the door 4. Remove the inside seal. 5. Remove the glass bolts. 6. While holding the door window, raise it at the rear and pull the INSTALLATION Installation is in the reverse order of removal. ● Check the glass for proper fit. Refer to ● On the drivers door, reset the motor. Refer to GW-60, "SETTING AFTER INSTALLATION" FITTING INSPECTION ● Check that the glass is securely fit into the glass run groove. ● Lower the glass slightly [approximately 10 to 20 mm (0.39 to 0.79 in)] and check that the clearance to the LIIA1686E LIIA1687E Glass bolts : 6.1 N·m (0.62 kg-m, 54 in-lb) |