|
|
PWC-100 < DTC/CIRCUIT DIAGNOSIS > [LH & RH FRONT AUTO UP/DOWN] POWER SUPPLY AND GROUND CIRCUIT 1. CHECK FRONT POWER WINDOW MOTOR RH FUNCTION Check front power window motor RH operation with power window and door lock/unlock switch RH. YES >> Power window and door lock/unlock switch RH power supply and ground circuit are OK. NO >> Refer to PWC-100, "FRONT POWER WINDOW SWITCH : Diagnosis Procedure" FRONT POWER WINDOW SWITCH : Diagnosis Procedure INFOID:0000000009176207 Regarding Wiring Diagram information, refer to PWC-80, "Wiring Diagram - With Left & Right Front Auto Up/ Power Window And Door Lock/unlock Switch RH Power Supply Circuit Check 1. CHECK POWER SUPPLY CIRCUIT Check voltage between power window and door lock/unlock switch RH connector D129 and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK HARNESS CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect BCM and power window and door lock/unlock switch RH. 3. Check continuity between BCM connector M81 and power window and door lock/unlock switch RH con- nector D129. 4. Check continuity between BCM connector M81 and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace the harness or connectors. 3. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect power window and door lock/unlock switch RH. 3. Check continuity between power window and door lock/unlock switch RH connector D129 and ground. Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-49, "Intermittent Incident" . NO >> Repair or replace the harness or connectors. Terminal Voltage (Approx.) (+) (–) Power window and door lock/unlock switch RH connector Terminal D129 8 Ground Battery voltage BCM connector Terminal Power window and door lock/un- lock switch RH connector Terminal Continuity M81 141 D129 8 Yes BCM connector Terminal Ground Continuity M81 141 No Power window and door lock/unlock switch RH Terminal Ground Continuity D129 7 Yes |