|
|
OPERATION INSPECTION HAC-73 < BASIC INSPECTION > [AUTOMATIC AIR CONDITIONING] C D E F G H J K L M A B HAC N O P OPERATION INSPECTION FRONT AUTOMATIC AIR CONDITIONING SYSTEM INFOID:0000000009176808 DESCRIPTION The purpose of the operational check is to check that the individual system operates normally. OPERATION INSPECTION 1. CHECK MEMORY FUNCTION 1. Set temperature control (driver side) to 32.0 °C (90°F). 2. Press OFF switch. 3. Turn ignition switch OFF. 4. Turn ignition switch ON. 5. Press AUTO switch. 6. Check that set temperature is maintained. YES >> GO TO 2. NO >> GO TO 10. 2. CHECK FRONT BLOWER MOTOR 1. Start engine. 2. Operate fan switch. 3. Check that fan speed changes. Check operation for all fan speeds. YES >> GO TO 3. NO >> GO TO 10. 3. CHECK DISCHARGE AIR (MODE SWITCH AND DEF SWITCH) 1. Operate fan switch to set the fan speed to maximum speed. 2. Operate MODE switch and DEF switch. 3. Check that air outlets change according to each indicated air outlet by placing a hand in front of the out- lets. Refer to HAC-18, "FRONT AUTOMATIC AIR CONDITIONING SYSTEM : System Description" . Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 10. 4. CHECK INTAKE AIR 1. Press REC switch to set the air inlet to recirculation. The REC switch indicator turns ON. 2. Listen to intake sound and confirm air inlets change. 3. Press REC switch again to set the air inlet to fresh air intake. The REC switch indicator turns OFF. 4. Listen to intake sound and confirm air inlets change. YES >> GO TO 5. NO >> GO TO 10. 5. CHECK DISCHARGE AIR TEMPERATURE (LH/RH INDEPENDENT TEMERATURE ADJUSTMENT FUNCTION) 1. Operate temperature control (driver side). 2. Check that discharge air temperature (driver side) changes. 3. Operate temperature control (passenger side). The DUAL switch indicator is turns ON. 4. Check that the discharge air temperature (passenger side) changes. 5. Press DUAL switch. The DUAL switch indicator turns OFF. 6. Check that air temperature setting (LH/RH) is unified to the driver side temperature setting. Check condition : Engine running at normal operating temperature. |