|
|
DLK-110 < BASIC INSPECTION > DIAGNOSIS AND REPAIR WORK FLOW Inspect according to Diagnosis Procedure of the system. YES >> GO TO 8. NO >> Check according to GI-49, "Intermittent Incident" . 8. REPAIR OR REPLACE THE MALFUNCTIONING PART 1. Repair or replace the malfunctioning part. 2. Reconnect parts or connectors disconnected during Diagnosis Procedure again after repair and replace- ment. 3. Check DTC. If DTC is detected, erase it. >> GO TO 9. 9. FINAL CHECK When DTC is detected in step 2, perform DTC CONFIRMATION PROCEDURE again, and then check that the malfunction is repaired securely. When symptom is described by the customer, refer to confirmed symptom in step 3 or 4, and check that the symptom is not detected. YES-1 >> DTC is detected: GO TO 7. YES-2 >> Symptom remains: GO TO 4. NO >> Before returning the vehicle to the customer, always erase DTC. |