|
|
REAR WINDOW DEFOGGER SWITCH DEF-27 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J K M A B DEF N O P Is the inspection result normal? YES >> Replace A/C auto amp. Refer to HAC-157, "Removal and Installation" . NO >> Repair or replace harness. 5. CHECK A/C AUTO AMP. (REAR WINDOW DEFOGGER SWITCH) FUNCTION 1. Check (“REAR DEF SW”) in BCM - REAR DEFOGGER “DATA MONITOR” mode by using CONSULT. 2. Operate rear window defogger switch and check the status on CONSULT screen. Is the inspection result normal? YES >> GO TO 8. NO >> GO TO 6. 6. CHECK REAR WINDOW DEFOGGER ON SIGNAL CIRCUIT Check voltage between BCM connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-80, "Removal and Installation" NO >> GO TO 7. 7. CHECK HARNESS CONTINUITY 1. Push ignition switch to OFF. 2. Disconnect BCM and front air control. 3. Check continuity between BCM connector and A/C auto amp. 4. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> Replace A/C auto amp. Refer to HAC-157, "Removal and Installation" . NO >> Repair or replace harness. 8. CHECK REAR WINDOW DEFOGGER RELAY GROUND CIRCUIT (+) (–) Condition Voltage (V) (Approx.) A/C auto amp. Connector Terminal M50 35 Ground Rear window de- fogger switch ON Battery voltage OFF 0 Monitor Item Condition status REAR DEF SW Rear window defogger Pressed On Released Off (+) (–) Condition Voltage (V) (Approx.) BCM Connector Terminal M18 32 Ground Rear window de- fogger switch ON 0 OFF 5 BCM A/C auto amp. Continuity Connector Terminal Connector Terminal M18 32 M50 15 Yes BCM Ground Continuity Connector Terminal M18 32 No |