Nissan Pathfinder. Manual - part 262

BRAKE WARNING LAMP

BRC-107

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

BRAKE WARNING LAMP

Component Function Check

INFOID:0000000009177328

1.

CHECK BRAKE WARNING LAMP FUNCTION (1)

Check that brake warning lamp in combination meter turns ON for approximately 2 seconds after ignition

switch is turned ON.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-107, "Diagnosis Procedure"

.

2.

CHECK BRAKE WARNING LAMP FUNCTION (2)

Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.
Is the inspection result normal?

YES

>> Inspection End.

NO

>> Check parking brake switch system. Refer to 

BRC-103, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009177329

1.

PERFORM THE SELF-DIAGNOSIS

With CONSULT.

Perform self-diagnostic result.
Are any DTCs detected?

YES

>> Refer to 

BRC-42, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK COMBINATION METER

Check if indication and operation of combination meter are normal. Refer to 

MWI-9, "METER SYSTEM : Sys-

tem Description"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit). Refer to 

BRC-123, "Removal and Installa-

tion"

.

NO

>> Replace combination meter. Refer to 

MWI-82, "Removal and Installation"

.

BRC-108

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

VDC OFF INDICATOR LAMP

VDC OFF INDICATOR LAMP

Component Function Check

INFOID:0000000009177330

1.

CHECK VDC OFF INDICATOR LAMP FUNCTION (1)

Check that VDC OFF indicator lamp in combination meter turns ON for approximately 2 seconds after ignition

switch is turned ON.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-108, "Diagnosis Procedure"

.

2.

CHECK VDC OFF INDICATOR LAMP FUNCTION (2)

Check that VDC OFF indicator lamp in combination meter turns ON/OFF when VDC OFF switch is operated.
Is the inspection result normal?

YES

>> Inspection End.

NO

>> Check VDC OFF switch. Refer to 

BRC-104, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009177331

1.

PERFORM THE SELF-DIAGNOSIS

With CONSULT.

Perform self diagnostic result.
Are any DTCs detected?

YES

>> Refer to 

BRC-42, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK COMBINATION METER

Check if indication and operation of combination meter are normal. Refer to 

MWI-9, "METER SYSTEM : Sys-

tem Description"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit). Refer to 

BRC-123, "Removal and Installa-

tion"

.

NO

>> Replace combination meter. Refer to 

MWI-82, "Removal and Installation"

.

SLIP INDICATOR LAMP

BRC-109

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

SLIP INDICATOR LAMP

Component Function Check

INFOID:0000000009177332

1.

CHECK SLIP INDICATOR LAMP FUNCTION

Check that slip indicator lamp in combination meter turns ON for approximately 2 seconds after ignition switch

is turned ON.
Is the inspection result normal?

YES

>> Inspection End.

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-109, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009177333

1.

PERFORM THE SELF-DIAGNOSIS

With CONSULT.

Perform self diagnostic result.
Are any DTCs detected?

YES

>> Refer to 

BRC-42, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK COMBINATION METER

Check if indication and operation of combination meter are normal. Refer to 

MWI-9, "METER SYSTEM : Sys-

tem Description"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit). Refer to 

BRC-123, "Removal and Installa-

tion"

.

NO

>> Replace combination meter. Refer to 

MWI-82, "Removal and Installation"

.

BRC-110

< SYMPTOM DIAGNOSIS >

[VDC/TCS/ABS]

VDC/TCS/ABS

SYMPTOM DIAGNOSIS

VDC/TCS/ABS

Symptom Table

INFOID:0000000009177334

If ABS warning lamp, VDC OFF indicator lamp and SLIP indicator lamp turn ON, perform self-diagnosis.

NOTE:
• 1: The ABS does not operate when the speed is 10 km/h (6 MPH) or less.
• 2: Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depressed (just place a foot on it).

However, this is normal.

- When shifting gears
- When driving on slippery road
- During cornering at high speed
- When passing over bumps or grooves [approximately 50 mm (1.97 in) or more]
- When pulling away just after starting engine [at approximately 10 km/h (6 MPH) or higher]

Symptom

Check item

Reference

Excessive ABS function operation fre-
quency

Brake force distribution

BRC-111, "Diagno-

sis Procedure"

Looseness of front and rear axle

Wheel sensor and rotor system

Unexpected pedal reaction

Brake pedal stroke

BRC-112, "Diagno-

sis Procedure"

Make sure the braking force is sufficient when the ABS is not operating.

The braking distance is long

Check stopping distance when the ABS is not operating.

BRC-113, "Diagno-

sis Procedure"

ABS function does not operate (Note 1)

ABS actuator and electric unit (control unit)

BRC-114, "Diagno-

sis Procedure"

Pedal vibration or ABS operation sound 
occurs (Note 2)

Brake pedal

BRC-115, "Diagno-

sis Procedure"

ABS actuator and electric unit (control unit)

Vehicle jerks during VDC/TCS/ABS con-
trol

ABS actuator and electric unit (control unit)

BRC-116, "Diagno-

sis Procedure"

TCM

ECM