|
|
C1197 VACUUM SENSOR BRC-95 < DTC/CIRCUIT DIAGNOSIS > [VDC/TCS/ABS] C D E G H I J K L M A B BRC N O P Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace malfunctioning components. 4. CHECK TERMINAL • Check vacuum sensor pin terminals for damage or loose connection with harness connector. • Check ABS actuator and electric unit (control unit) pin terminals for damage or loose connection with har- ness connector. Is the inspection result normal? YES >> GO TO 5. NO >> Repair or replace malfunctioning components. 5. REPLACE VACUUM SENSOR With CONSULT 1. Connect ABS actuator and electric unit (control unit) harness connector. 2. Replace vacuum sensor. Refer to BR-31, "Removal and Installation" . CAUTION: Always replace brake booster because vacuum sensor cannot be disassembled. 3. Erase self-diagnosis result for “ABS”. 4. Turn the ignition switch OFF. 5. Start engine. 6. Perform self-diagnosis for “ABS”. YES >> Replace ABS actuator and electric unit (control unit). Refer to BRC-123, "Removal and Installa- . NO >> Inspection End. Vacuum sensor — Continuity Connector Terminal E167 1 Ground No 2 3 |