|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-25 < SYSTEM DESCRIPTION > [BCM] C D E F G H I J K L B A O P N IMMU INFOID:0000000009174884 CAUTION: After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must be cycled OFF → ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go to ”sleep mode”, potentially causing a discharged battery and no-start condition. SELF DIAGNOSTIC RESULT DATA MONITOR ACTIVE TEST WORK SUPPORT BATTERY SAVER INFOID:0000000009174885 CAUTION: After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must be cycled OFF → ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go to ”sleep mode”, potentially causing a discharged battery and no-start condition. DATA MONITOR Monitor Item [Unit] Description CONFRM ID ALL [Yet/DONE] Switches to DONE when an Intelligent Key is registered. CONFIRM ID4 [Yet/DONE] CONFIRM ID3 [Yet/DONE] CONFIRM ID2 [Yet/DONE] CONFIRM ID1 [Yet/DONE] TP 4 [Yet/DONE] DONE indicates the number of Intelligent Key ID which has been registered. TP 3 [Yet/DONE] TP 2 [Yet/DONE] TP 1 [Yet/DONE] PUSH SW [On/Off] Indicates condition of push-button ignition switch. Test Item Description THEFT IND This test is able to check security indicator operation [On/Off]. Support Item Setting Description CONFIRM DONGLE ID — Dongle ID can be checked. Monitor Item [Unit] Description REQ SW -DR [On/Off] Indicates condition of door request switch LH. REQ SW -AS [On/Off] Indicates condition of door request switch RH. PUSH SW [On/Off] Indicates condition push-button ignition switch. UNLK SEN -DR [On/Off] Indicates condition of door unlock sensor. DOOR SW-DR [On/Off] Indicates condition of front door switch LH. DOOR SW-AS [On/Off] Indicates condition of front door switch RH. |