Nissan Pathfinder. Manual - part 1078

SEAT BELT PRE-TENSIONER

SR-29

< REMOVAL AND INSTALLATION >

C

D

E

F

G

I

J

K

L

M

A

B

SR

N

O

P

SEAT BELT PRE-TENSIONER

Removal and Installation

INFOID:0000000009176947

The front seat belt has two pre-tensioners. One pre-tensioner is part of the seat belt retractor and the other is

a lap belt pre-tensioner. For removal and installation, refer to 

SB-8, "Front Seat Belt"

 (seat belt retractor and

lap belt pretensioner)

SR-30

< REMOVAL AND INSTALLATION >

FRONT SEAT BELT BUCKLE SWITCH

FRONT SEAT BELT BUCKLE SWITCH

Removal and Installation

INFOID:0000000009176948

The front seat belt buckle switch is part of the front seat belt buckle. For removal and installation of the front

seat belt buckle, refer to 

SB-8, "Front Seat Belt"

.

OCCUPANT CLASSIFICATION SYSTEM

SR-31

< REMOVAL AND INSTALLATION >

C

D

E

F

G

I

J

K

L

M

A

B

SR

N

O

P

OCCUPANT CLASSIFICATION SYSTEM

Removal and Installation

INFOID:0000000009176949

OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT

WARNING:

• Before servicing the SRS, turn ignition switch OFF, disconnect both battery terminals then wait at

least three minutes.

• Do not use air tools or electric tools for servicing.

Removal

1. Remove front passenger seat assembly. Refer to  

SE-86, "Removal and Installation"

.

2. Disconnect the harness connector from the occupant classification system control unit.
3. Remove occupant classification system control unit bolts.
4. Remove occupant classification system control unit.

CAUTION:

• Replace the occupant classification control unit if it has been dropped or sustained an impact.

• Do not strike the occupant classification control unit.

Installation

Installation is in the reverse order of removal.

CAUTION:

• Do not damage the harness connector during installation.

• After installation is complete, check that no system malfunction is detected causing the air bag

warning lamp to illuminate. 

• If a malfunction is indicated by the air bag warning lamp after repair or replacement of the malfunc-

tioning parts, perform the SRS final check. Refer to 

SRC-16, "SRS Final Check"

.

OCCUPANT CLASSIFICATION SYSTEM SENSORS

The occupant classification system sensors are part of the front passenger seat frame assembly. For removal

and installation of the front passenger seat frame assembly, refer to 

SE-109, "Exploded View"

.

SR-32

< REMOVAL AND INSTALLATION >

FRONT PASSENGER AIR BAG OFF INDICATOR

FRONT PASSENGER AIR BAG OFF INDICATOR

Removal and Installation

INFOID:0000000009176950

REMOVAL

1. Remove cluster lid C. Refer to 

IP-22, "CLUSTER LID C : Removal and Installation"

.

2. Remove screws and the front passenger air bag off indicator from cluster lid C.

INSTALLATION

Installation is in the reverse order of removal.