|
|
BR-18 < REMOVAL AND INSTALLATION > BRAKE PEDAL REMOVAL AND INSTALLATION BRAKE PEDAL Exploded View INFOID:0000000007567010 Removal and Installation INFOID:0000000007567011 REMOVAL 1. Remove instrument lower panel LH. Refer to 2. Remove knee protector. Refer to ST-31, "Removal and Installation" 3. Disconnect the stop lamp switch and ASCD brake switch harness connectors. 4. Remove snap pin and clevis pin from clevis of brake booster. 5. Remove the brake pedal assembly. CAUTION: Hold the brake booster and master cylinder so as not to drop out or contact them to other parts. INSTALLATION Note the following, and install the reverse order of removal. already applied.) NOTE: 1. Clevis pin 2. Brake pedal assembly 3. Brake pedal pad 4. ASCD brake switch 5. Stop lamp switch 6. Clip 7. Snap pin : Apply multi-purpose grease. Refer to for symbols not described on the above. JPFIA0440GB Revision: 2013 February 2012 Murano CrossCabriolet |