Murano Cross Cabriolet Z51 (2011 year). Manual - part 70

WIPER BLADE

WW-45

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

2.

From portion (A) of wiper refill (1), disengage wiper blade portion
(B) and remove wiper refill in the direction indicated by the arrow
as shown in the figure.

NOTE:

When the vertebra is detached.

• Insert the vertebra (1) into the wiper blade to the same bending

direction.

• If a vertebra has a notch, fit it to a protrusion inside the wiper refill.

JMLIA2254ZZ

JPLIA1586ZZ

Revision: 2012 March

2011 Murano CrossCabriolet

WW-46

< REMOVAL AND INSTALLATION >

FRONT WIPER DRIVE ASSEMBLY

FRONT WIPER DRIVE ASSEMBLY

Exploded View

INFOID:0000000006939373

REMOVAL VIEW

DISASSEMBLY VIEW

Removal and Installation

INFOID:0000000006939374

REMOVAL

1.

Remove front wiper arm. Refer to 

WW-42, "Removal and Installation"

.

2.

Remove cowl top cover. Refer to 

EXT-20, "Removal and Installation"

.

3.

Remove bolts from the front wiper drive assembly.

1.

Front wiper drive assembly

JPLIA0875ZZ

1.

Front wiper motor

2.

Shaft seal

3.

Front wiper linkage 2

4.

Front wiper frame

5.

Bracket

6.

Front wiper linkage 1

: Multi

−

purpose grease or an equivalent

JPLIA0876ZZ

Revision: 2012 March

2011 Murano CrossCabriolet

FRONT WIPER DRIVE ASSEMBLY

WW-47

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

4.

Disconnect the front wiper motor connector.

5.

Remove front wiper drive assembly from the vehicle.

INSTALLATION

1.

Install the front wiper drive assembly to the vehicle.

2.

Connect the front wiper motor connector.

3.

Operate the front wiper to move it to the auto stop position.

4.

Install the cowl top cover. Refer to 

EXT-20, "Removal and Installation"

.

5.

Install front wiper arms. Refer to 

WW-42, "Removal and Installation"

.

Disassembly and Assembly

INFOID:0000000006939375

DISASSEMBLY

1.

Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.

CAUTION:

Never bend the linkage or damage the plastic part of the ball joint when removing the front wiper
linkage.

2.

Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.

ASSEMBLY

1.

Connect the front wiper motor connector.

2.

Operate the front wiper to move it to the auto stop position.

3.

Disconnect the front wiper motor connector.

4.

Install front wiper motor to front wiper frame.

5.

Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.

6.

Install the front wiper linkage 1 to the front wiper frame.

CAUTION:

• Never drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint

(retainer). Apply multi

−

purpose grease or an equivalent if necessary.

Revision: 2012 March

2011 Murano CrossCabriolet

WW-48

< REMOVAL AND INSTALLATION >

WIPER AND WASHER SWITCH

WIPER AND WASHER SWITCH

Exploded View

INFOID:0000000006939378

Refer to 

BCS-79, "Exploded View"

.

Revision: 2012 March

2011 Murano CrossCabriolet