|
|
CHECK ANTI-PINCH FUNCTION PWC-35 < BASIC INSPECTION > C D E F G H I J L M A B PWC N O P CHECK ANTI-PINCH FUNCTION Description INFOID:0000000007200270 If any of the following operations are performed, the initialization is necessary for normal operation of anti- window motor (driver side/passenger side) is interrupted by blown fuse or disconnection and connection of • Disconnection and connection of power window main switch or front power window switch (passenger side) harness connector. • Removal of power window motor (driver side/passenger side) from regulator assembly. Work Procedure INFOID:0000000007200271 1. CHECK ANTI-PINCH FUNCTION 1. Fully open the door window. 2. Place a piece of wood near fully closed position. 3. Close door glass completely with AUTO-UP. 4. Check the following conditions. - Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops. - Check that glass does not rise not when operating the power window main switch or front power window CAUTION: • Perform initial setting when AUTO-UP operation or anti-pinch function does not operate nor- • Check that AUTO-UP operates before inspection when system initialization is performed. • Do not check with hands and other body parts because they may be pinched. Do not get >> END Revision: 2012 March 2011 Murano CrossCabriolet |