|
|
CHASSIS MAINTENANCE MA-25 < PERIODIC MAINTENANCE > C D E F G H I J K L M B MA N O A CAUTION: Never reuse gasket. REAR PROPELLER SHAFT REAR PROPELLER SHAFT : Inspection INFOID:0000000007233705 APPEARANCE AND NOISE • Check the propeller shaft tube surface for dents or cracks. If damaged, replace propeller shaft assembly. VIBRATION If vibration is present at high speed, inspect propeller shaft runout first. 1. With a dial indicator, measure propeller shaft runout at runout • Propeller shaft runout measuring point (Point “ ”). 2. If runout still exceeds specifications, separate propeller shaft at 3. If runout is more than the limit value, remove and check propeller shaft. 4. Check the vibration by driving vehicle. REAR DIFFERENTIAL GEAR OIL REAR DIFFERENTIAL GEAR OIL : Inspection INFOID:0000000007233706 OIL LEAKAGE Check that oil is not leaking from final drive assembly or around it. OIL LEVEL • Remove filler plug (1) and check oil level from filler plug mounting hole as shown in the figure. CAUTION: Never start engine while checking oil level. • Set a new gasket on filler plug and install it on final drive assembly. . CAUTION: Never reuse gasket. Propeller shaft runout : Refer to . JPDID0172ZZ : Vehicle front Dimension A: 506.5 mm (19.94 in) B: 497.5 mm (19.59 in) JPDID0156ZZ JPDID0164ZZ Revision: 2012 March 2011 Murano CrossCabriolet |