|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-13 < SYSTEM DESCRIPTION > C D E F G H I J K L B A O P N NOTE: *: Power supply position shifts to “LOCK” from “OFF”, when ignition switch is in the OFF position, selector lever is in the P position, and • Closing door • Opening door • Door is locked using door request switch • Door is locked using Intelligent Key The power supply position shifts to “ACC” when the push-button ignition switch (push switch) is pushed at “LOCK”. DOOR LOCK DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) INFOID:0000000007259154 WORK SUPPORT CONSULT screen item Indication/Unit Description Vehicle Speed km/h Vehicle speed of the moment a particular DTC is detected Odo/Trip Meter km Total mileage (Odometer value) of the moment a particular DTC is detected Vehicle Condition SLEEP>LOCK Power position status of While turning BCM status from low power consumption mode to SLEEP>OFF While turning BCM status from low power consumption mode to LOCK>ACC While turning power supply position from “LOCK” to “ACC” ACC>ON While turning power supply position from “ACC” to “IGN” RUN>ACC While turning power supply position from “RUN” to “ACC” (Vehicle CRANK>RUN While turning power supply position from “CRANKING” to “RUN” RUN>URGENT While turning power supply position from “RUN“ to “ACC” (Emer- ACC>OFF While turning power supply position from “ACC” to “OFF” OFF>LOCK While turning power supply position from “OFF” to “LOCK”* OFF>ACC While turning power supply position from “OFF” to “ACC” ON>CRANK While turning power supply position from “IGN” to “CRANKING” OFF>SLEEP While turning BCM status from normal mode (Power supply posi- LOCK>SLEEP While turning BCM status from normal mode (Power supply posi- LOCK Power supply position is “LOCK”* OFF Power supply position is “OFF” (Ignition switch OFF) ACC Power supply position is “ACC” (Ignition switch ACC) ON Power supply position is “IGN” (Ignition switch ON with engine ENGINE RUN Power supply position is “RUN” (Ignition switch ON with engine CRANKING Power supply position is “CRANKING” (At engine cranking) IGN Counter 0 - 39 The number of times that ignition switch is turned ON after DTC is detected → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. • The number is fixed to 39 until the self-diagnosis results are erased if it is over 39. Revision: 2012 March 2011 Murano CrossCabriolet |