|
|
BRAKE PIPING BR-23 < REMOVAL AND INSTALLATION > C D E G H I J K L M A B BR N O P 2. Align the brake hose pin to the projection (A) of the brake caliper 3. Install the brake tube to the brake hose, temporarily tighten the CAUTION: Check that all brake hoses and tubes are not twisted and 4. Tighten the flare nut to the specified torque with a crowfoot and CAUTION: Never scratch the flare nut and the brake tube. 5. Refill with new brake fluid and perform the air bleeding. Refer to BR-12, "Bleeding Brake System" . CAUTION: Never reuse drained brake fluid. FRONT : Inspection INFOID:0000000008456216 INSPECTION AFTER INSTALLATION 1. Check the brake hoses and tubes for the following: no scratches; no twist and deformation; no interfer- 2. Depress the brake pedal with a force of 785 N (80 kg, 176 lb) and hold down the pedal for approximately CAUTION: Retighten the applicable connection to the specified torque and repair any abnormal (damaged, REAR REAR : Exploded View INFOID:0000000008456217 JPFIA0099ZZ JPFIA0450GB Revision: 2012 September 2013 MURANO |