|
|
LAN-414 [CAN] CAN SYSTEM (TYPE 12) Revision; 2004 April 2003 Murano 2. CHECK HARNESS FOR OPEN CIRCUIT Check resistance between data link connector M24 terminals 6 (L) OK or NG OK >> Diagnose again. Refer to NG >> Repair harness between data link connector and BCM. BCM Circuit Check AKS006V2 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the negative battery terminal. 3. Check terminals and connector of BCM for damage, bend and loose connection (control module side and OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect BCM connector. 2. Check resistance between BCM harness connector M37 termi- OK or NG OK >> Replace BCM. Refer to BCS-36, "Removal and Installa- NG >> Repair harness between BCM and data link connector. Unified Meter and A/C Amp. Circuit Check AKS006V3 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the negative battery terminal. 3. Check terminals and connector of unified meter and A/C amp. for damage, bend and loose connection OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 6 (L) - 14 (Y) : Approx. 54 - 66 Ω PKIA2077E 70 (L) - 71 (Y) : Approx. 54 - 66 Ω LKIA0028E |