Nissan Murano. Manual - part 414

POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERATING 

WITH INTELLIGENT KEY

DLK-267

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERAT-
ING WITH INTELLIGENT KEY

Description

INFOID:0000000009719142

NOTE:
• Before performing the diagnosis in the following procedure, check “ Work Flow”. Refer to 

DLK-10, "Work

Flow"

.

Diagnosis Procedure

INFOID:0000000009719143

1.

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent key button?

YES

>> GO TO 2.

NO

>> Go to 

DLK-264, "Description"

.

2.

CHECK POWER WINDOW OPERATION

Check power window operation.
Does power window up/down with power window main switch?

YES

>> GO TO 3.

NO

>> Go to 

PWC-103, "Diagnosis Procedure"

.

3.

CHECK “PW DOWN SET” SETTING IN “WORK SUPPORT”

Check “PW DOWN SET” setting in “WORK SUPPORT”.
Refer to 

DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set “PW DOWN SET” setting in “WORK SUPPORT”.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

DLK-268

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

PANIC ALARM FUNCTION DOES NOT OPERATE

PANIC ALARM FUNCTION DOES NOT OPERATE

Description

INFOID:0000000009719144

NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to 

DLK-10, "Work Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

CONDITIONS OF VEHICLE (OPERATION CONDITIONS)

• Ignition switch is in OFF or LOCK position.
• Intelligent Key is removed from key slot.

Diagnosis Procedure

INFOID:0000000009719145

1.

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent key button?

YES

>> GO TO 2.

NO

>> Go to 

DLK-264, "Description"

.

2.

CHECK VEHICLE SECURITY ALARM OPERATION

Check vehicle security alarm operation.

Does alarm (headlamp and horn) active?

YES

>> GO TO 3.

NO

>> Go to 

DLK-264, "Description"

.

3.

CHECK “PANIC ALARM SET” SETTING IN “WORK SUPPORT”

Check “PANIC ALARM SET” setting in “WORK SUPPORT”.
Refer to 

DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set “PANIC ALARM SET” setting in “WORK SUPPORT”.

4.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

HAZARD AND HORN REMINDER DOES NOT OPERATE

DLK-269

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

HAZARD AND HORN REMINDER DOES NOT OPERATE

Description

INFOID:0000000009719146

NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to 

DLK-10, "Work Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

CONDITIONS OF VEHICLE (OPERATION CONDITIONS)

• Ignition switch is in OFF or LOCK position.
• Intelligent Key is removed from key slot.

Diagnosis Procedure

INFOID:0000000009719147

1.

CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”

Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to 

DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.

2.

CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”.

Check “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
Refer to 

DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.

3.

CHECK HAZARD WARNING LAMP

Check hazard warning lamp.
Refer to 

DLK-138, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK HORN

Check horn.
Refer to 

DLK-133, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

DLK-270

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Description

INFOID:0000000009719148

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-10, "Work

Flow"

.

Diagnosis Procedure

INFOID:0000000009719149

1.

CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”

Check “AUTO LOCK SET” setting in “WORK SUPPORT”.
Refer to 

DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.

2.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.