|
|
содержание .. 29 30 31 32 ..
ADP-116 < DTC/CIRCUIT DIAGNOSIS > SEAT MEMORY INDICATOR SEAT MEMORY INDICATOR Description INFOID:0000000009720769 • Memory switch is equipped on the seat memory switch installed to the driver side door trim. The operation signal is inputted to the driver seat control unit when the memory switch is operated. • The status of automatic drive positioner system can be checked according to the illuminating/flashing status. Component Function Check INFOID:0000000009720770 1. CHECK FUNCTION 1. Select “MEMORY SW INDCTR” in “Active test” mode with CONSULT. 2. Check the memory indicator operation. Is the operation of relevant parts normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to ADP-116, "Diagnosis Procedure" . Diagnosis Procedure INFOID:0000000009720771 1. CHECK SEAT MEMORY INDICATOR OPERATION Check seat memory indicator operation. Which is the malfunctioning indicator? All indicators are NG>>GO TO 2. 2. CHECK FUSE 1. Turn ignition switch OFF. 2. Check that the blown fuse after repairing the affected circuit if a fuse is blown. Is the fuse blown? YES >> Replace the blown fuse after repairing the affected circuit if a fuse is blown. NO >> GO TO 3. 3. CHECK MEMORY INDICATOR POWER SUPPLY Check voltage between seat memory switch harness connector and ground. Is the inspection result normal? YES >> Replace seat memory switch.Refer to ADP-212, "Removal and Installation" NO >> Repair or replace harness or connector. 4. CHECK MEMORY INDICATOR CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect driver seat control unit and seat memory switch connector. Test item Description MEMORY SW INDCTR OFF Memory switch indicator OFF ON-1 Indicator 1: ON ON-2 Indicator 2: ON Signal name Fuse No. Battery power supply 10 (10A) (+) (–) Voltage (V) (Approx.) Seat memory switch Connector Terminals D13 5 Ground Battery voltage |