Nissan X-Trail 32. Manual - part 392

DAS

DIAGNOSIS SYSTEM (AROUND VIEW MONITOR CONTROL UNIT)

DAS-309

< SYSTEM DESCRIPTION >

[PARK ASSIST]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

Function

Description

Read/Write Configuration

Before Replace ECU

Allows the reading of vehicle specification written in around view 
monitor control unit to store the specification in CONSULT.

After Replace ECU

Allows the writing of the vehicle information stored in CONSULT 
into the around view monitor control unit.

Manual Configuration

Allows the writing of the vehicle specification into the around view 
monitor control unit by hand.

DAS-310

< SYSTEM DESCRIPTION >

[PARK ASSIST]

DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)

DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)

CONSULT Function

INFOID:0000000011025229

APPLICATION ITEMS

CONSULT can display each diagnostic item using the diagnostic test modes shown as follows:

ECU IDENTIFICATION

Displays the part number of the sonar control unit.

SELF-DIAGNOSTIC RESULTS

For details, refer to 

SN-28, "DTC Index"

.

Freeze Frame Data (FFD)

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Test mode

Function

Ecu Identification

Sonar control unit part number can be read.

Self Diagnostic Results

Sonar control unit checks the conditions and displays memorized error.

Data Monitor

Sonar control unit input/output data in real time.

Active Test

Gives a drive signal to a load to check the operation.

Work support

Changes setting of each function.

Configuration

• Read and save the vehicle specification.
• Write the vehicle specification when replacing sonar control unit.

Item name

Display content

ODO/TRIP 
METER
(km)

Total driving distance (odometer value) upon DTC detection is displayed.

IGN counter
(0

∼

39)

Numerical value is displayed indicating the number of times that ignition switch is turned ON after the DTC is 
detected.
• When “0”is displayed, it indicates that the system is presently malfunctioning.
• When any numerical number other than “0” is displayed, it indicates that system malfunction in the past is de-

tected, but the system is presently normal.
NOTE:
Each time when ignition switch turns OFF

→

ON, numerical number increases from 1

→

2

→

3...38

→

39. When 

number of times exceeds 39, numeric display does not increase and 39 is displayed until self-diagnosis is 
erased.

Monitor Item

Display/

UNIT

Description

VEHICLE SPEED

km/h

Value of vehicle speed signal.

SONAR C/U POWER 
SUPPLY

V

Value of battery voltage (Ignition signal)

SENSOR VOLTAGE

V

Value of sensor voltage

DETECTION MODE

MODE1/

MODE2

NOTE:
This item is displayed, but cannot be monitored.

SW OPRT AFTER IGN 
ON

Yes/No

Temporary/permanent OFF operation by the user after turning ON the ignition switch.

DAS

DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)

DAS-311

< SYSTEM DESCRIPTION >

[PARK ASSIST]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

SONAR TEMPORARY 
OFF

Yes/No

Sonar system is in temporary OFF state.
NOTE:
The user can set temporary OFF by canceling the sonar indicator displayed on the combi-
nation meter.

SONAR PERMANENT 
OFF

Yes/No

Sonar system is in permanent OFF state.
NOTE:
The user can set permanent OFF on the settings screen of the combination meter.

P N RANGE

On/Off

Status of shift position

LED

On/Off

NOTE:
This item is displayed, but cannot be monitored.

TRAILER CONNECT

On/Off

NOTE:
This item is displayed, but cannot be monitored.

REVERSE RANGE

On/Off

Status of shift position

SHRT DST FRM RR 
SENS

cm

Display the closest approach detection distance that rear sensor detects.

SHRT DST FRM FR 
SENS

cm

Display the closest approach detection distance that front sensor detects.

COR[RL]

cm

Distance according to oscillation from corner sensor rear LH and detection by corner sen-
sor rear LH.

COR[RL]->CEN[RL]/
CEN[R]

cm

Distance according to oscillation from corner sensor rear LH and detection by center sen-
sor rear LH.

CEN[RL]/CEN[R]-
>COR[RL]

cm

Distance according to oscillation from center sensor rear LH and detection by corner sen-
sor rear LH.

CEN[RL]/CEN[R]

cm

Distance according to oscillation from center sensor rear LH and detection by center sen-
sor rear LH.

CEN[RL]->CEN[RR]

cm

Distance according to oscillation from center sensor rear LH and detection by center sen-
sor rear RH.

CEN[RR]->CEN[RL]

cm

Distance according to oscillation from center sensor rear RH and detection by center sen-
sor rear LH.

CEN[RR]

cm

Distance according to oscillation from center sensor rear RH and detection by center sen-
sor rear RH.

CEN[RR]/CEN[R]-
>COR[RR]

cm

Distance according to oscillation from center sensor rear RH and detection by corner sen-
sor rear RH.

COR[RR]->CEN[RR]/
CEN[R]

cm

Distance according to oscillation from corner sensor rear RH and detection by center sen-
sor rear RH.

COR[RR]

cm

Distance according to oscillation from corner sensor rear RH and detection by corner sen-
sor rear RH.

COR[FL]

cm

Distance according to oscillation from corner sensor front LH and detection by corner sen-
sor front LH.

COR[FL]->CEN[FL]/
CEN[F]

cm

Distance according to oscillation from corner sensor front LH and detection by center sen-
sor front LH.

CEN[FL]/CEN[F]-
>COR[FL]

cm

Distance according to oscillation from center sensor front LH and detection by corner sen-
sor front LH.

CEN[FL]/CEN[F]

cm

Distance according to oscillation from center sensor front LH and detection by center sen-
sor front LH.

CEN[FL]->CEN[FR]

cm

Distance according to oscillation from center sensor front LH and detection by center sen-
sor front RH.

CEN[FR]->CEN[FL]

cm

Distance according to oscillation from center sensor front RH and detection by center sen-
sor front LH.

CEN[FR]

cm

Distance according to oscillation from center sensor front RH and detection by center sen-
sor front RH.

Monitor Item

Display/

UNIT

Description

DAS-312

< SYSTEM DESCRIPTION >

[PARK ASSIST]

DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)

CEN[FR]/CEN[F]-
>COR[FR]

cm

Distance according to oscillation from center sensor front RH and detection by corner sen-
sor front RH.

COR[FR]->CEN[FR]/
CEN[F]

cm

Distance according to oscillation from corner sensor front RH and detection by center sen-
sor front RH.

COR[FR]

cm

Distance according to oscillation from corner sensor front RH and detection by corner sen-
sor front RH.

RVRB TIME COR[RL]

ms

Reverberating time of corner sensor rear LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME COR[RR]

ms

Reverberating time of corner sensor rear RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME CEN[RL]

ms

Reverberating time of center sensor rear LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME CEN[RR]

ms

Reverberating time of center sensor rear RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME COR[FL]

ms

Reverberating time of corner sensor front LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME COR[FR]

ms

Reverberating time of corner sensor front RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME CEN[FL]

ms

Reverberating time of center sensor front LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

RVRB TIME CEN[FR]

ms

Reverberating time of center sensor front RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.

FRONT BUZZER

On/Off

The operating state of buzzer (frontward) is displayed.
• On: Buzzer (frontward) operation
• Off: Buzzer (frontward) non-operation

REAR BUZZER

On/Off

The operating state of buzzer (backward) is displayed.
• On: Buzzer (backward) operation
• Off: Buzzer (backward) non-operation

PSM SYSTEM

NORMAL/

ERROR

The state of a parking space measurement system is displayed. 

PARKING MODE

PARA/PER

The parking method is displayed. 
• PARA: Parallel parking
• PER: Perpendicular parking

PSM ACTIVATION

On/Off

The operating state of parking space measurement system is displayed. 

PARKING DIRECTION

RIGHT/

LEFT

Parking position is displayed.

PARKING START POSI-
TION

NG/OK

Detection of a parking starting position is displayed.

PARKING SPACE DE-
TECT

NON/DE-

TECT

The detection state of a parking space is displayed.

Monitor Item

Display/

UNIT

Description