|
|
содержание .. 1174 1175 1176 1177 ..
STOP LAMP CIRCUIT EXL-161 < DTC/CIRCUIT DIAGNOSIS > [LED HEADLAMP] C D E F G H I J K M A B EXL N O P NO >> Repair or replace harness. 9. CHECK STOP LAMP / HIGH-MOUNTED STOP LAMP POWER SUPPLY CIRCUIT (OPEN) 1. Turn ignition switch OFF. 2. Disconnect BCM connector. 3. Check continuity between BCM harness connector and each stop lamp harness connector. Stop lamp High-mounted stop lamp Is the inspection result normal? YES >> GO TO 10. NO >> Repair or replace harness. 10. CHECK STOP LAMP / HIGH-MOUNTED STOP LAMP GROUND CIRCUIT Check continuity between each stop lamp harness connector and ground. Stop lamp High-mounted stop lamp Is the inspection result normal? YES-1 >> Stop lamp: GO TO 11. NO >> Repair or replace harness. 11. CHECK STOP LAMP BULB Check the applicable stop lamp bulb. Is the inspection result normal? YES >> Check the corresponding stop lamp bulb socket and harness. Repair or replace if necessary. NO >> Replace the corresponding stop lamp bulb. Refer to EXL-204, "REAR COMBINATION LAMP . Component Inspection INFOID:0000000010788854 1. CHECK STOP LAMP SWITCH-1 1. Turn ignition switch OFF. 2. Disconnect stop lamp switch connector. 3. Check continuity of stop lamp switch terminals. BCM Rear combination lamp (body side) Continuity Connector Terminal Connector Terminal RH B46 129 B59 2 Existed LH 134 B80 BCM High-mounted stop lamp Continuity Connector Terminal Connector Terminal B47 39 D154 1 Existed Rear combination lamp (body side) — Continuity Connector Terminal RH B59 4 Ground Existed LH B80 High-mounted stop lamp — Continuity Connector Terminal D154 2 Ground Existed |