EC9-104
< ECU DIAGNOSIS INFORMATION >
[R9M]
ECM
P0471
Exhaust gas pressure sensor
• Boost pressure limitation
• EGR valve is closed position
• Throttle control motor is opened
• CCSL deactivation (considered as abnormal with dashboard message)
• Freeshift inhibited
• CSF regeneration forbidden
• Torque limitation
P0487
EGR volume command circuit
• EGR valve is closed position
• Throttle control motor is opened
• Stop closed-loop control
• Freeshift inhibited
• CSF regeneration forbidden
• CCSL deactivation
P0488
EGR valve position control
• EGR valve is closed position
• Throttle control motor is opened
• Freeshift inhibited
• CCSL deactivation
• CSF regeneration forbidden
P0544
Exhaust gas temperature sensor 1 circuit
• EGR valve is closed position
• Throttle control motor is opened
• Prohibit DPF regeneration
P0560
Battery voltage
• Mechanically activated throttle limp-home
• Torque limitation
• ESP deactivated
• Glow plug circuit deactivated
• Inhibition of idle speed control
• Factory and aftersales routines inhibited
• Freeshift Inhibited
• CCSL deactivation (considered as abnormal with dashboard message)
• Wastegate cut off
• AGB in limp home if AGB
• Deactivation of the VVT
P060A
ECM
Reset ECU
P060B
• Engine speed limitation
• CCSL deactivation
• Freeshift inhibited
P061A
• Medium engine speed limitation
• CCSL deactivation with dashboard message
• Freeshift inhibited (If present)
P062B
• EGR valve is closed position
• Throttle control motor is opened
• CSF regeneration forbidden
• Increased idle speed
• CCSL deactivation with dashboard message
• Freeshift inhibited
• ESP deactivated and AGB in limp home mode
• Compression test routine forbidden
P0638
P2100
P2119
Electric throttle control actuator
• EGR valve is closed position
• Throttle control motor is opened
• CSF regeneration forbidden
• Compression test routine inhibited
• Airflow regulation cut off
• CCSL deactivation with dashboard message
• Freeshift inhibited
DTC No.
Detected items
Engine operating condition in fail-safe mode