|
|
Content .. 2071 2072 2073 2074 ..
SN-86 < DTC/CIRCUIT DIAGNOSIS > [WITH PARKING SPACE MEASUREMENT] B2722 CENTER SENSOR [RR] B2722 CENTER SENSOR [RR] DTC Logic INFOID:0000000010478041 DTC DETECTION LOGIC Diagnosis Procedure INFOID:0000000010478042 Regarding Wiring Diagram information, refer to 1. CHECK REAR SONAR CENTER SENSOR RH SIGNAL CIRCUIT CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect sonar control unit connector and rear sonar center sensor RH connector. 3. Check continuity between sonar control unit connector M60 and rear sonar center sensor RH connector 4. Check continuity between sonar control unit connector M60 and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness or connectors. 2. CHECK REAR SONAR CENTER SENSOR RH SIGNAL CIRCUIT SHORT TO BATTERY 1. Turn ignition switch ON. 2. Check voltage between sonar control unit connector M60 and ground. Is the inspection result normal? YES >> Replace rear sonar center sensor RH. Refer to SN-101, "REAR SENSOR : Removal and Installa- . NO >> Repair or replace harness or connectors. CONSULT Display DTC Detection Condition Possible Cause REAR RIGHT SIDE INTER- • Sensor is not configured. • Sensor configuration. Sonar control unit Rear sonar sensor RH Continuity Connector Terminal Connector Terminal M60 7 B115 2 Yes 22 1 Sonar control unit Ground Continuity Connector Terminal M60 7 — No Sonar control unit Ground Voltage (Approx.) Connector Terminal M60 7 — 0V |