|
|
Content .. 2033 2034 2035 2036 ..
MWI-76 < DTC/CIRCUIT DIAGNOSIS > METER CONTROL SWITCH SIGNAL CIRCUIT Component Inspection INFOID:0000000010435887 1. CHECK METER CONTROL SWITCH 1. Turn ignition switch OFF. 2. Disconnect meter control switch connector. 3. Check meter control switch. Is the inspection result normal? YES >> Inspection End. NO >> Replace meter control switch. Refer to MWI-87, "Removal and Installation" . Meter control switch Condition Continuity Terminals 7 4 When illumination control switch ( − ) is pressed Yes Other than the above No 5 When trip reset switch is pressed Yes Other than the above No 6 When illumination control switch (+) is pressed Yes Other than the above No |