|
|
LU-48 < PERIODIC MAINTENANCE > [R9M] ENGINE OIL PERIODIC MAINTENANCE ENGINE OIL Inspection INFOID:0000000010284224 ENGINE OIL LEVEL NOTE: 1. Pull out oil level gauge and wipe it clean. 2. Insert oil level gauge and check that the engine oil level is within 3. If it is out of range, adjust it. 4. When replacing engine oil this procedure must be performed. EC9-143, "Special Repair Requirement List" ENGINE OIL APPEARANCE • Check that engine oil for white turbidity or heavy contamination. Repair or replace damaged parts. ENGINE OIL LEAKAGE Check for engine oil leakage around the following area. OIL PRESSURE CHECK WARNING: • Be careful not to get burned, as engine oil may be hot. securely. 1. Check engine oil level. 2. Disconnect harness connector at oil pressure switch, and remove oil pressure switch using a deep socket. CAUTION: Handle oil pressure switch carefully and avoid impacts. 3. Install oil pressure gauge set [SST:KV113E0020 (Mot.836-05)]. 4. Start engine and warm it up to normal operating temperature. JPBIA0756ZZ |