Nissan Juke (2012 year). Service Repair Manual - part 50

 

  Index      Manuals     Nissan Juke (2012 year) - Service and Repair Manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     48      49      50      51     ..

 

 

Nissan Juke (2012 year). Service Repair Manual - part 50

 

 

UNLOCK SENSOR

DLK-83

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

NO

>> Repair or replace harness.

3.

CHECK UNLOCK SENSOR GROUND CIRCUIT

Check continuity between front door lock assembly (driver side) harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace harness.

4.

CHECK UNLOCK SENSOR 

Refer to 

DLK-83, "Component Inspection"

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Replace front door lock assembly (driver side).

5.

CHECK INTERMITTENT INCIDENT 

Refer to 

GI-43, "Intermittent Incident"

.

>> INSPECTION END

Component Inspection

INFOID:0000000007578860

1.

CHECK UNLOCK SENSOR

1.

Turn ignition switch OFF.

2.

Disconnect front door lock assembly (driver side) connector.

3.

Check continuity between front door lock assembly (driver side) terminals.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace front lock assembly (driver side).

Front door lock assembly (driver side)

Ground

Continuity 

Connector

Terminal

D38

4

Existed

Front door lock assembly (driver side)

Condition

Continuity

Terminal

3

4

Driver side door 

Unlock

Existed

Lock

Not existed

Revision: 2011 October

2012 JUKE

DLK-84

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

SYMPTOM DIAGNOSIS

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK
SWITCH

ALL DOOR

ALL DOOR : Description

INFOID:0000000007578861

All doors do not lock/unlock using door lock and unlock switch.

ALL DOOR : Diagnosis Procedure

INFOID:0000000007578862

1.

CHECK DOOR LOCK AND UNLOCK SWITCH

Check door lock and unlock switch.
Refer to 

DLK-67, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (driver side).
Refer to 

DLK-62, "DRIVER SIDE : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

DRIVER SIDE

DRIVER SIDE : Description

INFOID:0000000007578863

Driver side door does not lock/unlock using door lock and unlock switch.

DRIVER SIDE : Diagnosis Procedure

INFOID:0000000007578864

1.

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (driver side).
Refer to 

DLK-62, "DRIVER SIDE : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

PASSENGER SIDE

Revision: 2011 October

2012 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

DLK-85

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

PASSENGER SIDE : Description

INFOID:0000000007578865

Passenger side door does not lock/unlock using door lock and unlock switch.

PASSENGER SIDE : Diagnosis Procedure

INFOID:0000000007578866

1.

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (passenger side).
Refer to 

DLK-63, "PASSENGER SIDE : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

REAR LH

REAR LH : Description

INFOID:0000000007578867

Rear LH side door does not lock/unlock using door lock and unlock switch.

REAR LH : Diagnosis Procedure

INFOID:0000000007578868

1.

CHECK DOOR LOCK ACTUATOR

Check rear door lock assembly LH.
Refer to 

DLK-64, "REAR LH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

REAR RH

REAR RH : Description

INFOID:0000000007578869

Rear RH side door does not lock/unlock using door lock and unlock switch.

REAR RH : Diagnosis Procedure

INFOID:0000000007578870

1.

CHECK DOOR LOCK ACTUATOR

Check rear door lock assembly RH.
Refer to 

DLK-65, "REAR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

Revision: 2011 October

2012 JUKE

DLK-86

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DLK-87

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

ALL DOOR REQUEST SWITCHES

ALL DOOR REQUEST SWITCHES : Description

INFOID:0000000007578871

All doors do not lock/unlock using all door request switches.

ALL DOOR REQUEST SWITCHES : Diagnosis Procedure

INFOID:0000000007578872

1.

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent Key button?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-20, "REMOTE KEYLESS ENTRY FUNCTION : System Description"

.

2.

CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”

1.

Select “INTELLIGENT KEY” of “BCM” using CONSULT.

2.

Select “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT” mode.

3.

Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
Refer to 

DLK-30, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.

3.

CHECK DOOR SWITCH

Check door switch.
Refer to 

DLK-71, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
• Instrument center: Refer to 

DLK-41, "DTC Logic"

.

• Console: Refer to 

DLK-43, "DTC Logic"

.

• Luggage room: Refer to 

DLK-45, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna.
• Driver side: Refer to 

DLK-49, "DTC Logic"

.

• Passenger side: Refer to 

DLK-47, "DTC Logic"

.

• Rear bumper: Refer to 

DLK-51, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

DRIVER SIDE DOOR REQUEST SWITCH

Revision: 2011 October

2012 JUKE

DLK-88

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DRIVER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000007578873

All doors do not lock/unlock using driver side door request switch.

DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000007578874

1.

CHECK DRIVER SIDE DOOR REQUEST SWITCH

Check driver side door request switch.
Refer to 

DLK-69, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (driver side).
Refer to 

DLK-49, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

PASSENGER SIDE DOOR REQUEST SWITCH

PASSENGER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000007578875

All doors do not lock/unlock using passenger side door request switch.

PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000007578876

1.

CHECK PASSENGER SIDE DOOR REQUEST SWITCH

Check passenger side door request switch.
Refer to 

DLK-69, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (passenger side).
Refer to 

DLK-47, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

BACK DOOR REQUEST SWITCH

Revision: 2011 October

2012 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DLK-89

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

BACK DOOR REQUEST SWITCH : Description

INFOID:0000000007578877

All doors do not lock/unlock using back door request switch.

BACK DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000007578878

1.

CHECK BACK DOOR REQUEST SWITCH

Check back door request switch.
Refer to 

DLK-57, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (rear bumper).
Refer to 

DLK-51, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DLK-90

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERATION

DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERA-
TION

Diagnosis Procedure

INFOID:0000000007578879

1.

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-67, "Component Function Check"

.

2.

CHECK DOOR KEY CYLINDER SWITCH

Check door key cylinder switch.
Refer to 

DLK-60, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

DLK-91

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Diagnosis Procedure

INFOID:0000000007578880

1.

CHECK DTC WITH BCM AND TCM

Check that DTC is not detected with BCM and TCM.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

>> Refer to 

BCS-58, "DTC Index"

. (BCM)

NO-2

>> Refer to 

TM-116, "DTC Index"

. (TCM)

2.

CHECK POWER DOOR LOCK OPERATION

Check door lock/unlock using door lock and unlock switch.

Does door lock/unlock using door lock and unlock switch?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-67, "Component Function Check"

.

3.

CHECK REMOTE KEYLESS ENTRY RECEIVER

Check remote keyless entry receiver.
Refer to 

DLK-79, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INTELLIGENT KEY

Check Intelligent Key.
Refer to 

DLK-75, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DLK-92

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000007578881

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

BCS-58, "DTC Index"

.

2.

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-13, "System Description"

.

3.

CHECK DOOR SWITCH

Check door switch.
Refer to 

DLK-71, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

DLK-93

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000007578882

1.

CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.

3.

Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DLK-94

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

BACK DOOR DOES NOT OPENED

BACK DOOR DOES NOT OPENED

Diagnosis Procedure

INFOID:0000000007578883

1.

CHECK BACK DOOR OPENER SWITCH

Check back door opener switch.
Refer to 

DLK-53, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK BACK DOOR OPENER ACTUATOR

Check back door opener actuator.
Refer to 

DLK-53, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK VEHICLE SPEED SIGNAL

Check vehicle speed signal.
Refer to 

MWI-31, "DTC Index"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

DLK-95

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000007578884

1.

CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”

1.

Select “INTELLIGENT KEY” of “BCM” using CONSULT.

2.

Select “AUTO LOCK SET” in “WORK SUPPORT” mode.

3.

Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to 

DLK-30, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DLK-96

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPER-
ATE

Diagnosis Procedure

INFOID:0000000007578885

1.

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

2.

CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE

DLK-97

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000007578886

1.

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

2.

CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

DLK-98

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPER-

ATE

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OP-
ERATE

Diagnosis Procedure

INFOID:0000000007578887

1.

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

2.

CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.

3.

CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.

3.

Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to 

DLK-28, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.

4.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-80, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-43, "Intermittent Incident"

.

Revision: 2011 October

2012 JUKE

 

 

 

 

 

 

 

Content      ..     48      49      50      51     ..