Juke F15 (2012 year). Service Repair Manual - part 80

DLK-279, "Diagnosis Procedure"

CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT” mode.

Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
Refer to

DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
• Instrument center: Refer to

DLK-230, "DTC Logic"

• Console: Refer to

DLK-232, "DTC Logic"

• Luggage room: Refer to

DLK-234, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna.
• Driver side: Refer to

DLK-236, "DTC Logic"

• Passenger side: Refer to

DLK-238, "DTC Logic"

• Rear bumper: Refer to

DLK-240, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-256, "Component Function Check"

DRIVER SIDE DOOR REQUEST SWITCH

DRIVER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000006613139

All doors do not lock/unlock using driver side door request switch.

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DLK-273

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000006613140

CHECK DRIVER SIDE DOOR REQUEST SWITCH

Check driver side door request switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (driver side).
Refer to

DLK-236, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-256, "Component Function Check"

PASSENGER SIDE DOOR REQUEST SWITCH

PASSENGER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000006613141

All doors do not lock/unlock using passenger side door request switch.

PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000006613142

CHECK PASSENGER SIDE DOOR REQUEST SWITCH

Check passenger side door request switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (passenger side).
Refer to

DLK-238, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-246, "Component Function Check"

BACK DOOR REQUEST SWITCH

BACK DOOR REQUEST SWITCH : Description

INFOID:0000000006613143

All doors do not lock/unlock using back door request switch.

DLK-274

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

BACK DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000006613144

CHECK BACK DOOR REQUEST SWITCH

Check back door request switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (rear bumper).
Refer to

DLK-240, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DOOR DOES NOT LOCK/UNLOCK WITH DRIVER SIDE DOOR LOCK KNOB OR

DOOR KEY CYLINDER

DLK-275

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

DOOR DOES NOT LOCK/UNLOCK WITH DRIVER SIDE DOOR LOCK
KNOB OR DOOR KEY CYLINDER

Diagnosis Procedure

INFOID:0000000006608101

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?

YES

>> GO TO 2.

DLK-254, "Component Function Check"

CHECK UNLOCK SENSOR

Check unlock sensor.
Refer to

DLK-270, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-254, "Component Function Check"

DLK-276

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK
SWITCH

ALL DOOR

ALL DOOR : Description

INFOID:0000000006613127

All doors do not lock/unlock using door lock and unlock switch.

ALL DOOR : Diagnosis Procedure

INFOID:0000000006613128

CHECK DOOR LOCK AND UNLOCK SWITCH

Check door lock and unlock switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (driver side).
Refer to

DLK-249, "DRIVER SIDE : Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-258, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-249, "DRIVER SIDE : Component Function Check"

DRIVER SIDE

DRIVER SIDE : Description

INFOID:0000000006613129

Driver side door does not lock/unlock using door lock and unlock switch.

DRIVER SIDE : Diagnosis Procedure

INFOID:0000000006613130

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (driver side).
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

DLK-277

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-250, "PASSENGER SIDE : Component Function Check"

PASSENGER SIDE

PASSENGER SIDE : Description

INFOID:0000000006613131

Passenger side door does not lock/unlock using door lock and unlock switch.

PASSENGER SIDE : Diagnosis Procedure

INFOID:0000000006613132

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (passenger side).
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-251, "REAR LH : Component Function Check"

REAR LH

REAR LH : Description

INFOID:0000000006613133

Rear LH side door does not lock/unlock using door lock and unlock switch.

REAR LH : Diagnosis Procedure

INFOID:0000000006613134

CHECK DOOR LOCK ACTUATOR

Check rear door lock assembly LH.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-252, "REAR RH : Component Function Check"

REAR RH

REAR RH : Description

INFOID:0000000006613135

Rear RH side door does not lock/unlock using door lock and unlock switch.

REAR RH : Diagnosis Procedure

INFOID:0000000006613136

CHECK DOOR LOCK ACTUATOR

Check rear door lock assembly RH.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

DLK-278

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

DLK-279

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Diagnosis Procedure

INFOID:0000000006613291

CHECK DTC WITH BCM AND TCM

Check that DTC is not detected with BCM and TCM.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

BCS-67, "DTC Index"

. (BCM)

NO-2

>> Refer to

TM-171, "DTC Index"

(RE0F10B models) or

TM-366, "DTC Index"

(RE0F11A models).

(TCM)

CHECK POWER DOOR LOCK OPERATION

Check door lock/unlock using door lock and unlock switch.

Does door lock/unlock using door lock and unlock switch?

YES

>> GO TO 3.

DLK-254, "Component Function Check"

CHECK REMOTE KEYLESS ENTRY RECEIVER

Check remote keyless entry receiver.
Refer to

DLK-266, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY

Check Intelligent Key.
Refer to

DLK-262, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-280

< SYMPTOM DIAGNOSIS >

[TYPE 2]

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006613295

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

BCS-67, "DTC Index"

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder?

YES

>> GO TO 3.

DLK-276, "ALL DOOR : Diagnosis Procedure"

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-258, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK UNLOCK SENSOR

Check unlock sensor.
Refer to

DLK-270, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

ANTI-HIJACK FUNCTION DOES NOT OPERATE

DLK-281

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

ANTI-HIJACK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006613124

CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.

Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to

Is the inspection result normal?

YES

>> GO TO 2

>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-244, "Component Function Check"

DLK-282

< SYMPTOM DIAGNOSIS >

[TYPE 2]

BACK DOOR DOES NOT OPENED

BACK DOOR DOES NOT OPENED

Diagnosis Procedure

INFOID:0000000006613126

CHECK BACK DOOR OPENER SWITCH

Check back door opener switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK BACK DOOR OPENER ACTUATOR

Check back door opener actuator.
Refer to

DLK-242, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

CHECK VEHICLE SPEED SIGNAL

Check vehicle speed signal.
Refer to

MWI-36, "DTC Index"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

DLK-283

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006613125

CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “AUTO LOCK SET” in “WORK SUPPORT” mode.

Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

DLK-284

< SYMPTOM DIAGNOSIS >

[TYPE 2]

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPER-
ATE

Diagnosis Procedure

INFOID:0000000006613307

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE

DLK-285

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006613294

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

DLK-286

< SYMPTOM DIAGNOSIS >

[TYPE 2]

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPER-

ATE

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OP-
ERATE

Diagnosis Procedure

INFOID:0000000006613303

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"

Is the inspection result normal?

YES

>> GO TO 4.

>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

DLK-287

< SYMPTOM DIAGNOSIS >

[TYPE 2]

DLK

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006613293

CHECK DTC WITH BCM AND COMBINATION METER

Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

BCS-67, "DTC Index"

. (BCM)

NO-2

DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without

MWI-36, "DTC Index"

. (Combination meter)

CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “HAZARD ANSWER BACK” in “WORK SUPPORT” mode.

Check the “HAZARD ANSWER BACK” in “WORK SUPPORT”.
Refer to

DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “HAZARD ANSWER BACK” in “WORK SUPPORT”.

CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “ANS BACK I-KEY LOCK” in “WORK SUPPORT” mode.

Check the “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.
Refer to

DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without

Is the inspection result normal?

YES

>> GO TO 4.

>> Set “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.

CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT” mode.

Check the “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.
Refer to

EXL-72, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Set “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.

CHECK HAZARD FUNCTION

Check hazard function.
Refer to

Is the inspection result normal?

YES

>> GO TO 6.

>> Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to

DLK-263, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 7.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to