|
|
SENSOR POWER SUPPLY 2 CIRCUIT EC-1241 < DTC/CIRCUIT DIAGNOSIS > [MR EXCEPT FOR NISMO RS MODELS] C D E F G H I J K L M A EC N P O Is the inspection result normal? YES >> GO TO 3. NO >> Repair open circuit. 3. CHECK SENSOR POWER SUPPLY 2 CIRCUIT 1. Disconnect following sensors harness connector. 2. Check harness for short to power and short to ground, between the following terminals. Is the inspection result normal? YES >> GO TO 4. NO >> Repair short to ground or short to power in harness or connectors. 4. CHECK COMPONENTS Check the following. • APP sensor 2 (Refer to EC-1146, "Component Inspection" • FRP sensor (Refer to EC-921, "Component Inspection" EC-1040, "Component Inspection" .) • Turbocharger boost sensor (Refer to EC-939, "Component Inspection" • Camshaft position sensor (PHASE) (Refer to EC-954, "Component Inspection" • Mass air flow sensor (Refer to EC-845, "Component Inspection" .) • Refrigerant pressure sensor (Refer to EC-1238, "Diagnosis Procedure" • G sensor (Refer to EC-1122, "Component Inspection" .) Is the inspection result normal? YES GI-45, "Intermittent Incident" . NO >> Replace malfunctioning component. EC-921, "Component Inspection" + − Continuity APP sensor ECM Connector Terminal Connector Terminal E101 5 E19 142 Existed ECM Sensor Connector Terminal Name Connector Terminal E19 142 APP sensor 2 E101 5 F23 26 Mass air flow sensor F8 1 29 G sensor B32 3 Refrigerant pressure sensor E49 3 EOP sensor F43 3 Turbocharger boost sensor F75 2 FRP sensor F7 1 F24 66 CMP sensor F109 1 |