|
|
Content .. 1172 1173 1174 1175 ..
B0096 B-PILLAR SATELLITE SENSOR SRC-61 < DTC/CIRCUIT DIAGNOSIS > C D E F G I J K L M A B SRC N O P NO-2 >> Confirmation after repair: INSPECTION END Diagnosis Procedure INFOID:0000000012199613 WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.) • Never use unspecified tester or other measuring device. 1. CHECK DTC Perform each inspection according to the displayed DTC. [B0096–86]>>GO TO 4. Other than the above>>GO TO 2. 2. CHECK HARNESS CONNECTOR Check the harness connector for disconnection, looseness or damage. YES >> GO TO 3. NO–1 >> Damage: Replace malfunctioning harness and connector. NO–2 >> Disconnection or looseness: Securely lock the connector. 3. CHECK WIRING HARNESS Check the wiring harness externals. YES >> GO TO 4. NO >> Replace malfunctioning harness and connector. 4. REPLACE SATELLITE SENSOR RH 1. Replace satellite sensor RH. Refer to SR-26, "Removal and Installation" 2. Perform DTC confirmation procedure. Refer to . Is DTC detected? YES >> GO TO 5. NO >> INSPECTION END 5. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace air bag diagnosis sensor unit. Refer to SR-29, "Removal and Installation" 2. Perform DTC confirmation procedure. Refer to . Is DTC detected? YES >> GO TO 1. NO >> INSPECTION END |