|
|
MAINTENANCE SERVICE TSB Revision GENERAL 00-66 SEAT SLIDE SENSOR 1. Check that there is no connector damage, bent terminals or harness crimping. 2. Check the installation of the seat slide sensor (Refer to GROUP 52B, Seat Slide Sensor ). OCCUPANT CLASSIFICATION SENSOR 1. Check the occupant classification-ECU case and occupant classification sensor for dents, cracks or deformation. 2. Check the connector for damage, and the terminals for deformation. 3. Check the installation of the occupant classification-ECU and occupant classification sensor. WIRING HARNESS 1. Check the connector for poor connection. DANGER The SRS system may not operate if SRS harnesses or 2. Check the harness for binds, the connectors for damage, and the terminals for deformation. Replace any connector or AC307451 AB SEAT SLIDE AC305748 AC OCCUPANT OCCUPANT |