DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-24
NOTE: If the screen other than above is displayed,
troubles are present at two or more spots. In this
case, diagnose CAN bus lines by referring to the
trouble spot pinpoint procedures.
NOTE: If a trouble cannot be solved after performing
the diagnosis other than item 15, diagnose CAN bus
line thoroughly.
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 22
Diagnose the lines between CAN main
bus line and the A/C-ECU.
P.54C-587
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 23
Diagnose the lines between CAN main
bus line and the SRS-ECU.
P.54C-594
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 24
Diagnose the lines between CAN main
bus line and the combination meter.
P.54C-602
MUT-III SCREEN
DIAGNOSIS DETAILS
REFERENCE
PAGE
AC305791
: Red section on screen
AJ
MUT
ETACS
-ECU
AC-ECU
SRS-ECU
ABS-ECU
J/C
METER
-ECU
PCM
AC305791
: Red section on screen
AK
MUT
ETACS
-ECU
AC-ECU
SRS-ECU
ABS-ECU
J/C
METER
-ECU
PCM
AC305791
: Red section on screen
AL
MUT
ETACS
-ECU
AC-ECU
SRS-ECU
ABS-ECU
J/C
METER
-ECU
PCM