Mitsubishi Grandis. Manual - part 278

 

  Index      Mitsubishi     Mitsubishi Grandis - service repair manual

 

Search            

 

 

 

 

 

 

 

  

 

Content   ..  276  277  278  279   ..

 

 

Mitsubishi Grandis. Manual - part 278

 

 

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-574

SUNROOF MOTOR ASSEMBLY

ON-VEHICLE SERVICE

CUSTOMIZE FUNCTION

M1549002500623

Using MUT-III adjusts the following function. The 
programmed information is held even when the 
battery is disconnected.

• Headlamp automatic-shutdown function

To prevent the headlamp from being left illuminated, 

the headlamp is turned off automatically when 
opening the driver’s door, if the ignition switch is 
turned to the LOCK (OFF) position with the 
lighting switch in the TAIL or HEAD position.

• Vehicle speed-dependent wiper function

With the windshield wiper switch in the intermittent 

position, the intermittent duration changes 
depending on the intermittent adjusting knob 
position and the vehicle speed.

• Turn-signal lamp operation sound function

Synchronized with the hazard lamp and the turn 

signal lamp, the buzzer sounds.

• Dimmer interior lamp control duration

Termin
al No.

Check item

Check condition

Normal condition

1

Earth

Always

0  V

2

Input from power window motor

−

−

3

Input from power window motor

−

−

4

Power supply

Power window relay: ON

System voltage

5

Output to power window motor

−

−

6

SWS communication line

Power window relay: ON

0 to 12 V (pulse signal)

7

Output to power window motor

−

−

8

Input from power window motor

−

−

AC312932AB

E-07

Termin
al No.

Check item

Check condition

Normal condition

1

System voltage (for motor)

Always

System voltage

2

Power supply from ignition switch 
(IG2)

Ignition switch: ON

System voltage

3, 4

−

−

−

5

Earth

Always

0  V

6

Input from sunroof switch (close)

Sunroof switch: Close

0 V

7

−

−

−

8

Input from sunroof switch (open)

Sunroof switch: Open

0 V

9

−

−

−

10

SWS communication line (to 
ETACS-ECU)

Always

0 to 12 V (pulse signal)

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-575

When the door is closed with the ignition switch 

LOCK (OFF), the interior lamp is turned OFF 
automatically in the specified time.

• Power window timer function duration

Even after turning LOCK (OFF) the ignition switch, 

the power window can be operated for the 
specified time.

• Power window main switch operation control 

during power window timer activation

During power window timer activation, only the 

driver’s power window can be operated, using the 
power window main switch.

• Timer lock time after executing the keyless entry 

unlock

If any door including a tailgate is not opened after 

being unlocked with the keyless transmitter, 
doors are locked automatically within the 
specified time.

• Door-ajar warning function

Driving with any door, including a tailgate, not 

properly closed sounds the buzzer to let the 
driver know the door-ajar state.

• Rear wiper intermittent duration

When the rear wiper switch is turned ON, the rear 

wiper operates in the intermittent action. When 
the rear wiper switch is turned from OFF to ON 
two cycles, the rear wiper makes continuous 
operation regardless of the intermittent operation 
duration setting.

• Operation duration of interior lamp 

automatic-shutdown function

This function automatically turns OFF the interior 

lamp after a specified time has elapsed, if the 
interior lamp is ON with the ignition switch in the 
LOCK (OFF) position.

• Power window lock operation on the driver's seat

This function enables the driver to control the power 

windows other than the driver’s door power 
window with the power window main switch, 
when the power window lock switch incorporated 
in the power window main switch is pressed.

• Wiper linked with washer function

When this function is active, the windshield wiper 

operates if the washer switch is turned ON.

• Initialising all functions (Returning to the initial 

condition)

All adjusting functions are returned to the settings at 

the time of factory shipment.

NOTE: If item No.6 and 8 are both shown, they are 

deleted by initialising all the functions. The 
adjustment function item is displayed when the 
smart entry system is reactivated after 
initialisation of all the functions.

Item 
No.

Items shown 
on MUT-III 
screen

Item

Adjustment items 
shown on MUT-III 
screen

Adjusting contents

2

H/L 
AUTO-CUT

Headlamp 
automatic-shutdo
wn function

W.FUNCTION(A)

With function: The automatic tail 
lamp turn-off function with the 
ignition switch OFF (LOCK) is 
available.

W.FUNCTION(D)

With function: The automatic tail 
lamp turn-off function with the 
ignition switch OFF (LOCK) is not 
available. (Initial setting)

W/O FUNCTION

Without function

4

SPEED SEN 
WIP

Vehicle 
speed-dependent 
wiper function

W.FUNCTION

With function (Initial setting)

W/O FUNCTION

Without function

15

T/SIG.BUZZE
R

Turn-signal lamp 
operation sound 
function

W.FUNCTION

With function

W/O FUNCTION

Without function (the initial condition)

16

RM LMP TN 
OFF

Dimmer interior 
lamp control 
duration

30s

30 seconds

15s

15 seconds (the initial condition)

7.5s

7.5 seconds

W/O FUNCTION

0 second (no delay action)

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-576

24

KEYLES 
LOCK T

Timer lock time 
after executing the 
keyless entry 
unlock

30s

30 seconds (the initial condition)

60s

1 minute

120s

2 minutes

180s

3 minutes

26

DOOR WARN 
BUZ

Door-ajar warning 
function

W.FUNCTION

With function (Initial setting)

W/O FUNCTION

Without function

CONTIN ACTION

Continuous operation

28

R.INT WIPER 
T

Rear wiper 
intermittent 
duration

8s

8 seconds: Without continuous 
operation (Initial setting)

4s(W SUCSSON)

4 seconds: With continuous 
operation

8s(W SUCSSON)

8 seconds: With continuous 
operation

16s(W SUCSSON)

16 seconds: With continuous 
operation

CONTIN ACTION

Continuous operation (without the 
intermittence)

4s

4 seconds: Without continuous 
operation

16s

16 seconds: Without continuous 
operation

30

RM/L 
AUTO-CUT

Operation duration 
of interior lamp 
automatic-shutdo
wn function

3min.

3 minutes

30min.

30 minutes (the initial condition)

60min.

60 minutes

W/O FUNCTION

Without function

31

P/W LOCK 
MODE

Power window 
lock operation on 
the driver's seat

ALL SEATS OPE

Driver can operate power windows 
on all doors even when the power 
window lock is ON (Initial setting).

ONLY DR SEAT

Operating seats other than the 
driver's seat is prohibited when lock 
is ON.

37

WIP SYCR 
WASH

Wiper linked with 
washer function

W.FUNCTION

With function (Initial setting)

W/O FUNCTION

Without function

39

TURN-SIGNA
L

Turn signal lamp 
operation 
condition 
adjustment 
function

IG-ON

Turn signal lamp can be operated 
when the ignition switch is turned ON 
(Initial setting).

IG-ACC

Turn signal lamp can be operated 
when the ignition switch 1 is in ACC 
or ON position.

Item 
No.

Items shown 
on MUT-III 
screen

Item

Adjustment items 
shown on MUT-III 
screen

Adjusting contents

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-577

NOTE: 

.

•

Adjustment items other than the above will also be shown on MUT-III screen. However, they cannot be 
reconfigured.

40

KEYLES 
HAZARD

Keyless entry 
hazard 
answer-back 
flashing pattern 
adjustment 
function

LOCK1,UNLOCK2

LOCK: Flash once, UNLOCK: Flash 
twice (Initial setting)

LOCK1, UNLOCK0

LOCK: Flash once, UNLOCK: No 
flash

LOCK0, UNLOCK2

LOCK: No flash, UNLOCK: Flash 
twice

LOCK2, UNLOCK1

LOCK: Flash twice, UNLOCK: Flash 
once

LOCK2, UNLOCK0

LOCK: Flash twice, UNLOCK: No 
flash

LOCK0, UNLOCK1

LOCK: No flash, UNLOCK: Flash 
once

NO BLINK

No flashing

Item 
No.

Items shown 
on MUT-III 
screen

Item

Adjustment items 
shown on MUT-III 
screen

Adjusting contents

 

 

 

 

 

 

 

Content   ..  276  277  278  279   ..