|
|
TEST ACTION APPLICABILITY 8 NOTE: The ECM must have proper power and ground connections for the t, read the ECM DTCs. Does the DRBIII t display any ECM DTCs? All Yes → Refer to symptom list for problems related to ECM DTC. Perform NO START VERIFICATION - VER-1. No → Go To 9 9 Turn the ignition on. t, read the SKREEM DTCs. Does the DRBIII t display any SKREEM DTCs? All Yes → Refer to symptom list for problems related to SKREEM. Perform NO START VERIFICATION - VER-1. No → Go To 10 10 Turn the ignition on. t, read the TCM DTCs. Does the DRBIII t display any TCM DTCs? All Yes → Refer to symptom list for problems related to TCM. Perform NO START VERIFICATION - VER-1. No → Go To 11 11 Perform the Checking the ECM Power and Grounds test. All Yes → Repair as necessary. Perform NO START VERIFICATION - VER-1. No → Go To 12 12 Turn the ignition off. All Yes → Repair the Starter Relay Control circuit for a short to voltage. Perform NO START VERIFICATION - VER-1. No → Go To 13 244 DRIVEABILITY - DIESEL *ENGINE WILL NOT CRANK — Continued |