TEST
ACTION
APPLICABILITY
7
Turn the ignition off.
Disconnect the CAB harness connector.
Using a 12-volt test light connected to 12-volts, check the CAB harness connector
Ground circuits.
NOTE: The test light must illuminate brightly. Compare the brightness to
that of a direct connection to the battery.
Does the test light illuminate brightly?
All
Yes
→ Replace the Pump Motor in accordance with the Service Informa-
tion.
Perform ABS VERIFICATION TEST - VER 1.
No
→ Repair the Ground circuit for an open.
Perform ABS VERIFICATION TEST - VER 1.
59
BRAKES (CAB)
PUMP MOTOR —
Continued