|
|
Symptom: LOSS OF IGNITION RUN - START When Monitored and Set Condition: LOSS OF IGNITION RUN - START When Monitored: With the ignition in the Run-Start position the ACM monitors the Fused Ignition Switch Output Run-Start circuit for proper system voltage. Set Condition: If the voltage on the Fused Ignition Switch Output Run-Start circuit drops below approximately 6.0 volts, the code will set and all communicate with the DRB will POSSIBLE CAUSES ACM, LOSS OF IGNITION RUN - START VOLTAGE INTERMITTENT RUN - START CONDITION ACTIVE CODE PRESENT TEST ACTION APPLICABILITY 1 Ensure the battery is fully charged. All ACM - ACTIVE DTC ACM - STORED DTC NOTE: When reconnecting Airbag system components, the ignition must be 2 WARNING: TO AVOID PERSONAL INJURY OR DEATH, TURN IGNITION All Repair: Replace the Airbag Control Module in accordance with Service 45 AIRBAG |