Mercedes-Benz ML320. Manual - part 560

 

  Index      Mercedes     Mercedes-Benz ML320 - service repair manual 1997-2005 year

 

Search            

 

 

 

 

 

 

 

  

 

Content   ..  558  559  560  561   ..

 

 

Mercedes-Benz ML320. Manual - part 560

 

 

Risk of explosion  

Spray cans (engine compartment preservative, paints, etc.) are pressurized and can explode when heated up to 
above 50°C. 

Safety instructions/precautions  

Protect cans from direct sunlight and temperatures above 50°C. Do not drill or burn the can after use.  

Only use in well ventilated areas, wear respiratory protection if necessary.  

RISK OF POISONING & RISK OF INJURY - AS00.00-Z-0016-01A 

Wear respiratory protection, protective gloves and safety glasses. Only pour glue into suitable and 
appropriately marked containers.  

Potential risks  

Risk of poisoning  

When glue vapors are inhaled , the respiratory system could be damaged because even small amounts of the 
substances contained in some types of glues can attack the mucous membranes. 

Swallowing glue can cause poisoning symptoms such as headaches, dizziness, cramps, stomach aches, 
vomiting, respiratory paralysis and unconsciousness. Moreover, irritation may occur to the respiratory paths and 
eyes. 

Risk of injury  

Most adhesives can glue limbs and eyelids as well as cause severe irritation to skin and eyes. 

Safety precautions/instructions  

Before applying adhesives, ensure that you have complied with all use and safety instructions; obtain the 
safety data sheet from the manufacturer if required.  

Perform gluing work only in well ventilated rooms.  

No fire, sparks, open flames or smoking.  

Wear protective gloves and eye protection, if necessary respiratory protection and protective clothing.  

Do not fill glue into beverage cups  

Store glue where it is not accessible for unauthorized persons.  

First aid measures  

Eye contact 

Immediately rinse eyes thoroughly with running, lukewarm water and contact a physician. 

 

2004 Mercedes-Benz ML350 

1998-2005 GENINFO Overall vehicle - 163 Chassis

  

me 

 

Skin contact 

Remove moistened clothing.  

Immediately wash affected skin areas with warm water and soap.  

Swallowed glue 

Rinse out mouth Drink large quantity of water.  

Contact physician or medical service.  

INJURY HAZARD OF CUTTING OR SCRAPING ON SHARP VEHICLE PARTS - AS00.00-Z-0017-01A 

When working on or in the area of sharp vehicle parts with burrs always wear protective gloves. Deburr 
repair panels.  

Injury hazard  

When working on body, superstructure, assembly and chassis parts which cannot be or are not yet deburred due 
to the production procedure or processing stage, injuries are possible from cutting, scratching or scraping 
against the burr. 

Rules of behavior/protective measures  

Wear protective gloves.  

Deburr repair panels and processed cut edges.  

RISK OF DEATH CAUSED BY BODY PARTS BEING PULLED IN BY ROTATING VEHICLE WHEELS AND ROLLER 
DYNAMOMETER ROLLERS - AS00.00-Z-0019-01A 

Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Safeguard areas 
with rotating vehicle parts and dynamometer rollers against unauthorized access. Safeguard roller 
dynamometer from unauthorized access.  

Risk of death  

Rotating parts in and around the running engine and the drive train as well as rotating dynamometer rollers and 
vehicle wheels can cause serious injury . 

When performing operations on the roller dynamometer, appropriate shielding (barriers, safety guards) must be 
used to protect blind hazard zones from unauthorized access. 

Safety instructions/precautions  

Always observe the general safety rules for roller dynamometer operation.  

Wear closed and close-fitting work clothes.  

Remove all items of jewelry (chains, rings, etc.). 

 

2004 Mercedes-Benz ML350 

1998-2005 GENINFO Overall vehicle - 163 Chassis

  

me 

 

Restrain long hair by wearing an appropriate head cover.  

Operate roller dynamometers only within the prescribed capacity limits.  

Ensure that all persons remain outside of the hazard zone of rotating wheels, shafts and dynamometer 
rollers when the dynamometer is in or ready for operation.  

During testing, the driver's seat may only be vacated in case of emergency.  

When not in use, protect roller dynamometers from unauthorized use by locking the main switch.  

If the roller dynamometer used has an integrated workpit, the pit must be sealed off after use.  

RISK OF DEATH CAUSED BY CONTACT WITH PARTS CONDUCTING HIGH VOLTAGES. - AS00.00-Z-0020-01A 

Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart 
pacemakers) must not perform any work on such components.  

Risk of death caused by electric shock  

Electric shocks can cause fibrillation of the heart or even cardiac arrest. The effects of an electric shock may 
sometimes first appear after several minutes have gone by; for this reason always seek medical attention. 

Safety instructions/precautions  

Persons who wear electronic implants (e.g. heart pacemakers) must not carry out any work on such 
components. 

Do not touch parts which conduct high voltages.  

When working on such components, for example: 

connecting and disconnecting electrical components  

replacing parts  

connecting test equipment  

it is first of all necessary to disconnect the ground cable from the battery. 

RISK OF DEATH CAUSED BY COMING INTO CONTACT WITH COMPONENTS OF A 220 V SYSTEM - AS00.00-Z-0021-
01A 

Do not touch voltage conducting parts in of a 220 V system  

Risk of death caused by electric shock  

Risk of death caused by coming into contact with electrical parts of the 220 V system. Electric shocks can cause 
fibrillation of the heart or even cardiac arrest. It may also take several minutes for the consequences of an 
electric shock to show themselves; for this reason 

always contact a doctor. 

Risk of injury caused by burns  

 

2004 Mercedes-Benz ML350 

1998-2005 GENINFO Overall vehicle - 163 Chassis

  

me 

 

Electric shock or direct body contact with a power source can lead to burns or scalding. 

Safety instructions/precautions  

Never connect the 220 V power supply to an outside socket during any repair work. 

Do not touch any conductive parts of the 220 V system. 

Before beginning any work always: 

Disconnect the 220 V system  

Ensure that the 220 V system cannot be reactivated  

Ensure that no voltage is present  

Ensure that the parts you are working on are grounded and short circuited  

All repair work should be performed only by a trained electrician or under the direction and supervision of a 
trained electrician. 

Persons who wear electronic implants (e.g. heart pacemakers) must not carry out any work on such 
components. 

When performing any repair work on the 220 V system, proper insulated protective clothing must be worn and 
insulated tools and protective devices must be used as per the safety regulations. 

 Observe country-specific regulations. 

First aid measures  

The shocked person must be immediately removed from the electric circuit. 

Use protective gloves and a wood board or a wood ladder to push or move the shocked person out of the danger 
zone. 

 First attempt to turn off the power. 

Check for breathing. If there is no breathing or insufficient breathing, the preferable action is to perform 
mouth-to-mouth resuscitation. If necessary, carry out CPR.  

If victim is unconscious, but breathing, place victim in the recovery position.  

Sterile bandages for burns.  

 If any of these symptoms occur, consult a physician immediately. 

RISK OF DEATH CAUSED BY WORK PERFORMED ON LIQUEFIED GAS SYSTEMS - AS00.00-Z-0022-01A 

Before commencing any work, ensure that all sources of ignition have been eliminated. Wear protective 

 

2004 Mercedes-Benz ML350 

1998-2005 GENINFO Overall vehicle - 163 Chassis

  

me 

 

 

 

 

 

 

 

 

Content   ..  558  559  560  561   ..