Mazda 3 (2018 year). Instruction

7. Prompt: “Confirmation prompts are

off/on.”

▼ Voice Recognition Learning

Function (Speaker Enrollment)
(Type A)

The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice. If
the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 5-83). The registration
must be performed completely. The
required time is a few minutes. The user
needs to be seated in the driver's seat with
the voice input command list for voice
recognition learning visible.

When voice recognition learning is done
for the first time

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Voice training”
3. Prompt: “This operation must be

performed in a quiet environment
while the vehicle is stopped. See the
owner's manual for the list of required
training phrases. Press and release the
talk button when you are ready to
begin. Press the hang-up button to
cancel at any time.”

4. Press the talk button with a short press.

5. The voice guidance reads out the voice

input command number (refer to the
voice input command list for voice
recognition learning). (Ex. “Please
read phrase 1”)

6. Say: [Beep] “0123456789” (Say the

voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)

7. Prompt: “Speaker enrollment is

complete.”

NOTE
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.

Voice recognition re-learning

If voice recognition learning has already
been done.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Voice training”
3. Prompt: “Enrollment is enabled/

disabled. Would you like to disable/
enable or retrain?”

4. Say: [Beep] “Retrain”
5. Prompt: “This operation must be

6. Press the talk button with a short press.
7. The voice guidance reads out the voice

input command number (refer to the
voice input command list for voice
recognition learning). (Ex. “Please
read phrase 1”)

Interior Features

Bluetooth®

5-86

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

8. Say: [Beep] “0123456789” (Say the

voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)

9. Prompt: “Speaker enrollment is

complete.”

NOTE
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.

Voice input command list for voice
recognition learning

When reading out, the following points
must be observed:



Read out the numbers one at a time
correctly and naturally.
(For example, “1234” must be read out
“one, two, three, four” not “twelve,
thirty four”.)



Do not read out parentheses. “(” and
hyphens “-” are used for separating
numbers in a phone number.

Ex.
“(888) 555-1212” must be spoken “Eight,
eight, eight, five, five, five, one, two, one,
two.”

Phrase

Command

0123456789

(888) 555-1212

Call

Dial

Setup

Cancel

Continue

Help

NOTE



The applicable phrase appears in the
audio display.



After user voice registration is
completed, voice guidance “Speaker
enrollment is complete” is announced.

Voice recognition learning on/off

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Voice training”
3. Prompt: “Enrollment is enabled/

disabled. Would you like to disable/
enable or retrain?”

4. Say: [Beep] “Disable” or “Enable”
5. When “Disable” is spoken, the voice

recognition learning is turned off.
When “Enable” is spoken, the voice
recognition learning is turned on.

6. Prompt: “Speaker Enrollment is

disabled/enabled.”

▼ Bluetooth

Preparation (Type B)

Device pairing

To use Bluetooth

audio and Hands-Free,

the device equipped with Bluetooth

has

to be paired to the unit using the following
procedure. A maximum of seven devices
including Bluetooth

audio devices and

hands-free mobile phones can be paired.

Interior Features

Bluetooth®

5-87

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

NOTE



The Bluetooth

system may not operate

for 1 or 2 minutes after the ignition is
switched to ACC or ON. However, this
does not indicate a problem. If the
Bluetooth

system does not connect

automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth

setting on the device is normal and
attempt to reconnect the
Bluetooth

-enabled device from the

vehicle side.



If Bluetooth

-enabled devices are used

in the following locations or conditions,
connection via Bluetooth

may not be

possible.



The device is in a location hidden
from the center display such as behind
or under a seat, or inside the glove
compartment.



The device contacts or is covered by a
metal object or body.



The device is set to power-saving
mode.

Pairing Procedure

1. Select the

icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Turn the Bluetooth

setting on.

5. Select

to display the

message and switch to the device
operation.

6. Using your device, perform a search

for the Bluetooth

device (Peripheral

device).

7. Select “Mazda” from the device list

searched by the device.

8. (Device with Bluetooth

version 2.0)

Input the displayed 4-digit pairing
code into the device.
(Device with Bluetooth

version 2.1

or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the

Connection permission and phonebook
access permission for your mobile
device may be required depending on
the mobile device.

9. If pairing is successful, the functions

of the device connected to Bluetooth

are displayed.

10. (Devices compatible with Mazda

Email / SMS function)
SMS (Short Message Service)
messages, and E-mail for the device
are downloaded automatically. A
download permission operation for
your device may be required
depending on the device.

NOTE
When Call history and messages are
downloaded automatically, each automatic
download setting must be on.
Refer to Communication Settings on page
5-110.

After a device is registered, the system
automatically identifies the device. By
activating Bluetooth

Hands-Free again,

or by activating Bluetooth

Hands-Free

first after switching the ignition from OFF
to ACC, the device connection condition
is indicated in the center display.

Interior Features

Bluetooth®

5-88

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

IMPORTANT note about pairing and
automatic reconnection:



If pairing is redone on the same
mobile phone device, first clear
“Mazda” displayed on the Bluetooth

setting screen of the mobile device.



When the OS of the device is updated,
the pairing information may be deleted.
If this happens, reprogram the pairing
information to the Bluetooth

unit.



Before you pair your device, make sure
that Bluetooth

is “ON”, both on your

phone and on the vehicle.

Device selection

If several devices have been paired, the
Bluetooth

unit links the device last

paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.

Connecting other devices

1. Select the

icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Turn the Bluetooth

setting on.

5. Select the name of the device you

would like to connect.

selection

Connects both devices as hands-free
and Bluetooth

audio.

selection

Connects as a hands-free device.

selection

Connects as Bluetooth

audio.

NOTE
The following functions can be used for
the Hands-free or audio.



Hands-free: Phone calls and
E-mail/SMS



Audio: Bluetooth

audio, Pandora

Aha™, Stitcher™ radio

Disconnecting a device

1. Select the

icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Turn the Bluetooth

setting on.

5. Select the device name which is

currently connected.

6. Select

Deleting a device

Selecting and deleting devices

1. Select the

icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Turn the Bluetooth

setting on.

5. Select the device name which you

would like to delete.

6. Select

7. Select

Deleting all devices

1. Select the

icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Select

5. Select

6. Select

Interior Features

Bluetooth®

5-89

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Changing PIN code

PIN code (4 digits) can be changed.
1. Select the

icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Select

5. Select

6. Input the new PIN code to be set.
7. Select .

▼ Available Language (Type B)

The Bluetooth

Hands-Free System

applies to the following languages:



English



Spanish



French

Refer to Settings on page 5-50.

▼ Voice Recognition (Type B)

In this section, the basic operation of the
voice recognition is explained.

Activating Voice Recognition

Press the talk button.

Ending Voice Recognition

Use one of the following methods:



Press the hang-up button.



Say, “Cancel”.



Operate the commander switch or the
center display (only when vehicle is
stopped).

Skipping Voice Guidance (for faster
operation)

Press and release the talk button.

Troubleshooting for Voice Recognition

If you do not understand an operation
method while in the voice recognition
mode, say “Tutorial” or “Help”.

Commands useable anytime during
voice recognition

“Go Back” and “Cancel” are commands
which can be used at anytime during voice
recognition.

Returning to previous operation

To return to the previous operation, say,
“Go Back” while in voice recognition
mode.

Cancel

To put the Bluetooth

Hands-Free system

in standby mode, say, “Cancel” while in
voice recognition mode.

To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:



The voice recognition cannot be
performed while voice guidance or the
beep sound is operating. Wait until
the voice guidance or the beep sound
is finished before saying your
commands.



Phone related commands are available
only when your phone is connected via
Bluetooth

. Make sure your phone is

connected via Bluetooth

before you

operate phone related voice commands.



Music play commands, such as Play
Artist and Play Album can be used only
in USB audio mode.



Do not speak too slowly or loudly (no
loud voice).

Interior Features

Bluetooth®

5-90

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21



Speak clearly, without pausing between
words or numbers.



Dialects or different wording other than
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.



It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.



Close the windows and/or the moonroof
to reduce loud noises from outside the
vehicle, or turn down the airflow of the
climate control system while Bluetooth

Hands-Free is being used.



Make sure the vents are not directing air
up towards the microphone.

NOTE
If the voice recognition performance is not
satisfactory.
Refer to Troubleshooting on page 5-125.

Interior Features

Bluetooth®

5-91

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

▼ Audio Operation Using Voice Recognition (Type B)

Voice command

When the talk button is pressed and the following command is spoken, the audio or
navigation can be operated. The commands in the () can be omitted. The specified name and
number are put into the {}.

Standard command

Voice command

Function

cancel

Ends the voice recognition mode.

(go) back

Returns to the previous operation.

help

Usable commands can be verified.

tutorial

Basic voice commands and methods of use can be verified.

(go to) home (screen)/main menu

Moves to the home screen.

(go to) communication

Moves to the communication screen.

(go to) navigation

Moves to the navigation screen.

(go to) entertainment (menu)

Moves to the entertainment screen.

(go to) settings

Moves to the setting screen.

(go to) favorites

Moves to the favorites screen.

Communication (phone) related command

Voice command

Function

Call {name in phonebook} (mobile/
home/work/other)
Example: “Call John Mobile”

Call to the contact in the downloaded phonebook.
Refer to Making a Call on page 5-101.

Redial

Call to the last contact you called.
Refer to Making a Call on page 5-101.

Callback

Call to the last contact who called you.
Refer to Making a Call on page 5-101.

Entertainment (audio) related command

Voice command

Function

Corresponding audio

source

(Go to/Play) AM (Radio)

Switches the audio source to AM radio.

All

(Go to/Play) FM (Radio)

Switches the audio source to FM radio.

All

(Go to/Play) Bluetooth (Audio) Switches the audio source to BT audio.

All

(Go to/Play) Pandora

Switches the audio source to Pandora

All

(Go to/Play) Aha (Radio)

Switches the audio source to Aha™ Radio.

All

(Go to/Play) Stitcher

Switches the audio source to Stitcher™ Radio.

All

(Go to/Play) USB 1

Switches the audio source to USB 1.

All

Interior Features

Bluetooth®

5-92

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Voice command

Function

Corresponding audio

source

(Go to/Play) USB 2

Switches the audio source to USB 2.

All

Play Playlist {Playlist name}

Plays the selected playlist.

USB

Play Artist {Artist name}

Plays the selected artist.

USB

Play Album {Album name}

Plays the selected album.

USB

Play Genre {Genre name}

Plays the selected genre.

USB

Play Folder {Folder name}

Plays the selected folder.

USB

Navigation related command

For the navigation screen voice commands, refer to the separate navigation system manual.

NOTE



Some commands cannot be used depending on the grade and specification.



Some commands cannot be used depending on the device connection conditions and the
use conditions.



The commands are examples of the available commands.

Interior Features

Bluetooth®

*Some models.

5-93

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Bluetooth

Hands-Free

(Type A)

▼ Making a Call

Phonebook Usage

Telephone calls can be made by saying the
name of a person (voice tag) whose phone
number has been registered in Bluetooth

Hands-Free in advance. Refer to
Phonebook registration.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Call”
3. Prompt: “Name please.”
4. Say: [Beep] “XXXXX... (Ex. “John's

phone”)” (Say a voice tag registered in
the phonebook.)

5. Prompt: “Calling XXXXX... (Ex.

“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag
and phone number location registered
in phonebook).

6. Say: [Beep] “Yes”
7. Prompt: “Dialing”

NOTE
The “Call” command and the voice tag
can be combined.
Ex. In Step 2, say, “Call John's phone”,
then, Steps 3 and 4 can be skipped.

Phonebook registration

Phone numbers can be registered to the
Bluetooth

Hands-Free phonebook.

NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “New entry”
5. Prompt: “Name please.”
6. Say: [Beep] “XXXXX... (Ex. “Mary's

phone”)” (Say a voice tag for the name
registered.)

7. Prompt: “Adding XXXXX... (Ex.

“Mary's phone”) (Registered voice
tag). Is this correct?”

8. Say: [Beep] “Yes”
9. Prompt: “Home, Work, Mobile, or

Other?”

10. Say: [Beep] “Mobile” (Say “Home” ,

“Work”, “Mobile”, or “Other”, for the
desired location to be registered.)

11. Prompt: “Mobile (Location to be

registered). Is this correct?”

12. Say: [Beep] “Yes”
13. Prompt: “Number, please.”
14. Say: [Beep] “XXXXXXXXXXX”

(Say the phone number to be
registered.)

15. Prompt: “XXXXXXXXXXX (Phone

number registration). After the beep,
continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to save the number.”

Interior Features

Bluetooth®

5-94

*Some models.

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

16. (Registration)

Press the pick-up button or say
“Enter”, then go to Step 17.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 15.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.”. Then go back to
Step 13.

17. Prompt: “Number saved. Would you

like to add another number for this
entry?”

18. Say: [Beep] “Yes” or “No”.
19. If “Yes”, an additional phone number

registration can be made for the same
entry.
If “No”, the system returns to standby
status.

(Import contact)

Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth

Hands-Free phonebook using

Bluetooth

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “Import contact”
5. Prompt: “The hands free System is

ready to receive a contact from a
phone. Only a home, a work, and a
mobile number can be imported, This
process requires operation of a mobile
phone. refer to the phone's manual for
more information”

6. Device (Mobile phone) operation:

Select one entry from the phonebook
and send it using Bluetooth

7. Prompt: “X (Number of locations

which include data) numbers have
been imported. What name would you
like to use for these numbers?”

8. Say: [Beep] “XXXXX... (Ex. “Mary's

phone”)” (Say a voice tag for the name
registered.)

9. Prompt: “Adding XXXXX... (Ex.

“Mary's phone”) (Voice tag). Is this
correct?”

10. Say: [Beep] “Yes”
11. Prompt: “Number saved. Would you

like to import another contact?”

12. Say: [Beep] “Yes” or “No”
13. If “Yes”, the procedure proceeds to

Step 5.
If “No”, the system returns to standby
status.

Editing phonebook

The data registered to the Bluetooth

Hands-Free phonebook can be edited.

NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “Edit”
5. Prompt: “Please say the name of the

entry you would like to edit or say,
“List names”.”

Interior Features

Bluetooth®

5-95

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

6. Say: [Beep] “XXXXX... (Ex. “Mary's

phone”)” (Say the voice tag for the
registered name to be edited in the
phonebook.)

7. Prompt: “Home, Work, Mobile, or

Other?”

8. Say: [Beep] “Home” (Say the

registered location to be edited:
“Home”, “Work”, “Mobile”, or
“Other”.)

9. Prompt: “XXXXX... (Ex. “Mary's

phone”) (Registered voice tag) XXXX
(Ex. “Home”) (Registered location). Is
this correct?”

10. Say: [Beep] “Yes”
11. Prompt: “The current number is

XXXXXXXXXXX (Ex. “555-1234”)
(Currently registered number). New
number, please.”

NOTE
If there was no previous phone number
registered to a location (Ex. “Work”),
the prompt will only read out
“Number, please”

12. Say: [Beep] “XXXXXXXXXXX (Ex.

“555-5678”)” (Say the new phone
number to be registered.)

13. Prompt: “XXXXXXXX (Telephone

number) After the beep, continue to
add numbers, or say Go-Back to
re-enter the last entered numbers, or
press the Pick-Up button to save the
number.”

14. (Number Change)

Press the pick-up button, then go to
Step 15.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 13.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed. Number, please.”.
Then go back to Step 12.

15. Prompt: “Number changed.”

Phonebook data deletion

(Erasing individual phonebook data)

Individual data registered to the
Bluetooth

Hands-Free phonebook can be

cleared.

NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “Delete”
5. Prompt: “Please say the name of the

entry you would like to delete or say,
“List names”. ”

6. Say: [Beep] “XXXXX... (Ex. “John's

phone”) ” (Say the registered voice tag
to be deleted from the phonebook.)

Interior Features

Bluetooth®

5-96

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

7. Prompt: “Deleting XXXXX... (Ex.

“John's phone”) (Registered voice tag)
Home (Registered location). Is this
correct?”

8. Say: [Beep] “Yes”
9. Prompt: “XXXXX... (Ex. “John's

phone”) (Registered voice tag) Home
(Registered location) deleted.”

(Complete deletion of the phonebook
data)

All data registered to the Bluetooth

Hands-Free phonebook can be erased.

NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “Erase all”
5. Prompt: “Are you sure you want to

erase everything from your Hands Free
system phonebook?”

6. Say: [Beep] “Yes”
7. Prompt: “You are about to delete

everything from your Hands Free
system phonebook. Do you want to
continue?”

8. Say: [Beep] “Yes”
9. Prompt: “Please wait, erasing the

Hands Free system phonebook.”

10. Prompt: “Hands-Free system

phonebook erased.”

Read-out of names registered to the
Bluetooth

Hands-Free phonebook

Bluetooth

Hands-Free can read out the

list of names registered to its phonebook.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “List names”
5. Prompt: “XXXXX..., XXXXX...,

XXXXX... (Ex. “John's phone”,
Mary's phone, Bill's phone)” (Voice
guidance reads out the voice tags
registered to the phonebook.)
Press the talk button with a short press
during the read-out at the desired
name, and then say one of the
following voice commands to execute
it.



“Continue”: Continues the list
readout.



“Call”: Calls the registered
phonebook data when the talk button
is short-pressed.



“Edit”: Edits the registered
phonebook data when the talk button
is short-pressed.



“Delete”: Deletes the registered
phonebook data when the talk button
is short-pressed.



“Previous”: Returns to the previous
phonebook data in read-out when the
talk button is short-pressed.

6. Prompt: “End of list, would you like

to start from the beginning?”

7. Say: [Beep] “No”
8. The procedure returns to Step 3.

Interior Features

Bluetooth®

5-97

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Redial Function

Redialing the number of the person
previously dialed using the phone is
possible.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Redial”
3. Prompt: “Dialing”

Telephone Number Input

NOTE
Practice this while parked until you are
confident you can do it while driving in a
non-taxing road situation. If you are not
completely comfortable, make all calls
from a safe parking position, and only
start driving when you can devote your
full attention to driving.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX

(Telephone number)”

5. Prompt: “XXXXXXXXXXX.

(Telephone number) After the beep,
continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.”

6. (Dialing)

Press the pick-up button or say “Dial”,
then go to Step 7.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.”. Then go back to
Step 3.

7. Prompt: “Dialing”

NOTE
The “Dial” command and a telephone
number can be combined.
Ex. In Step 2, say, “Dial 123-4567” then,
Steps 3 and 4 can be skipped.

Emergency calls

A call can be made to the emergency
phone number (911: U.S.A./Canada, 066:
Mexico) using the voice input command.
It may not function properly in some areas
in Mexico.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Emergency”
3. - U.S.A./Canada vehicles - Prompt:

“Dialing “911”, is this correct?”
- Mexico vehicles - Prompt: “Dialing
“066”, is this correct?”

4. Say: [Beep] “Yes”
5. Prompt: “Dialing”

Interior Features

Bluetooth®

5-98

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

▼ Receiving an Incoming Call

1. Prompt: “Incoming call, press the

pick-up button to answer”

2. To accept the call, press the pick-up

button.
To reject the call, press the hang-up
button.

▼ Hanging Up a Call

Press the hang-up button during the call. A
beep sound will confirm that call is ended.

▼ Mute

The microphone can be muted during a
call.
1. Press the talk button with a short press.
2. Say: [Beep] “Mute”
3. Prompt:“Microphone muted”

Canceling mute

1. Press the talk button with a short press.
2. Say: [Beep] “Mute off”
3. Prompt:“Microphone unmuted”

▼ Transferring a Call from

Hands-Free to a Device (Mobile
Phone)

Communication between the hands-free
unit and a device (Mobile phone) is
canceled, and the line can be switched to a
standard call using a device (Mobile
phone).
1. Press the talk button with a short press.
2. Say: [Beep] “Transfer call”
3. Prompt:“Transferred call to phone”

▼ Transferring a Call from a Device

(Mobile Phone) to Hands-Free

Communication between devices (Mobile
phone) can be switched to Bluetooth

Hands-Free.

1. Press the talk button with a short press.
2. Say: [Beep] “Transfer call”
3. Prompt:“Transferred call to Hands

Free system”

▼ Call interrupt

A call can be interrupted to receive an
incoming call from a third party.
Switch to a new incoming call using the
following methods.

Method 1

1. Press the pick-up button.
2. Prompt: “Swapping calls.”

Method 2

1. Press the talk button with a short press.
2. Say: [Beep] “Swap calls”
3. Prompt: “Swapping calls.”

NOTE



To refuse an incoming call, press the
hang-up button.



After receiving a new incoming call, the
previous call is placed on hold.

Switching calls

Switching back to the previous call can
also be done.

Method 1

1. Press the pick-up button.
2. Prompt: “Swapping calls.”

Method 2

1. Press the talk button with a short press.
2. Say: [Beep] “Swap calls”
3. Prompt: “Swapping calls.”

Three-way call function

1. Press the talk button with a short press.
2. Say: [Beep] “Join calls”

Interior Features

Bluetooth®

5-99

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

3. Prompt: “Joining calls”

Making a call using a telephone number

1. Press the talk button with a short press.
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX

(Telephone number)”

5. Prompt: “XXXXXXXXXXX.

(Telephone number) After the beep,
continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.”

6. (Dialing)

7. Prompt: “Dialing”

Making calls using the phonebook

1. Press the talk button with a short press.
2. Say: [Beep] “Call”
3. Prompt: “Name please.”
4. Say: [Beep] “XXXXX... (Ex. “John's

phone”)” (Say a voice tag registered in
the phonebook.)

5. Prompt: “Calling XXXXX... (Ex.

“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag
and phone number location registered
in phonebook).

6. Say: [Beep] “Yes”
7. Prompt: “Dialing”

Redialing function

1. Press the talk button with a short press.
2. Say: [Beep] “Redial”
3. Prompt: “Dialing”

Ending the current call

Press the hang-up button during the call.

▼ DTMF (Dual Tone Multi-Frequency

Signal) Transmission

This function is used when transmitting
DTMF via the user's voice. The receiver of
a DTMF transmission is generally a home
telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] “XXXX... send” (Say

DTMF code)

3. Prompt:“Sending XXXX... (DTMF

code)”

Interior Features

Bluetooth®

5-100

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Bluetooth

Hands-Free

(Type B)

▼ Making a Call

For Mazda Connect, making calls is
possible using any of the following six
methods:



Phonebook downloaded from
Bluetooth

device (mobile phone)

(voice recognition function can be used)



Favorites



Call record



Dialing a telephone number (voice
recognition function can be used)



“Redial” - Voice recognition command
for making a call to the latest outgoing
call record.



“Call back” - Voice recognition
command for making a call to the latest
incoming call record.

Phonebook Usage

Telephone calls can be made by saying the
contact name in the downloaded
phonebook or the name of a person whose
phone number has been registered in the
Bluetooth

Hands-Free. Refer to Import

contact (Download Phonebook).
1. Press the talk button.
2. Wait for the beep sound.
3. Say: “Call XXXXX... (Ex. “John”)

Mobile”.

4. Follow the voice guidance to place the

call.

Screen operation

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the contact

list.

3. Select the contact you would like to

call to display the details for the
contact.

4. Select the desired phone number to

make the call.

Import contact (Download Phonebook)

Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth

Hands-Free phonebook using

Bluetooth

(Automatic downloading)

The “Auto Download Contacts” setting
must be on. When hands-free is connected
to the device, the phonebook is
downloaded automatically.
Refer to Communication Settings on page
5-110.

(Manually downloading)

If the “Auto Download Contacts” setting
is off, download the phonebook using the
following procedure.
1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the contact

list.

3. Select

4. Select

to switch to the

device operation.

5. If

is selected, select

6. Download will be started from the

mobile phone.

Interior Features

Bluetooth®

*Some models.

5-101

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Mazda 3 (2018 year). Instruction - part 24