Mazda 3 Hatchback (2018 year). Instruction

7. Prompt: “Deleting XXXXX... (Ex.

“John's phone”) (Registered voice tag)
Home (Registered location). Is this
correct?”

8. Say: [Beep] “Yes”
9. Prompt: “XXXXX... (Ex. “John's

phone”) (Registered voice tag) Home
(Registered location) deleted.”

(Complete deletion of the phonebook
data)

All data registered to the Bluetooth

Hands-Free phonebook can be erased.

NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “Erase all”
5. Prompt: “Are you sure you want to

erase everything from your Hands Free
system phonebook?”

6. Say: [Beep] “Yes”
7. Prompt: “You are about to delete

everything from your Hands Free
system phonebook. Do you want to
continue?”

8. Say: [Beep] “Yes”
9. Prompt: “Please wait, erasing the

Hands Free system phonebook.”

10. Prompt: “Hands-Free system

phonebook erased.”

Read-out of names registered to the
Bluetooth

Hands-Free phonebook

Bluetooth

Hands-Free can read out the

list of names registered to its phonebook.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.”

4. Say: [Beep] “List names”
5. Prompt: “XXXXX..., XXXXX...,

XXXXX... (Ex. “John's phone”,
Mary's phone, Bill's phone)” (Voice
guidance reads out the voice tags
registered to the phonebook.)
Press the talk button with a short press
during the read-out at the desired
name, and then say one of the
following voice commands to execute
it.



“Continue”: Continues the list
readout.



“Call”: Calls the registered
phonebook data when the talk button
is short-pressed.



“Edit”: Edits the registered
phonebook data when the talk button
is short-pressed.



“Delete”: Deletes the registered
phonebook data when the talk button
is short-pressed.



“Previous”: Returns to the previous
phonebook data in read-out when the
talk button is short-pressed.

6. Prompt: “End of list, would you like

to start from the beginning?”

7. Say: [Beep] “No”
8. The procedure returns to Step 3.

Interior Features

Bluetooth®

5-97

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Redial Function

Redialing the number of the person
previously dialed using the phone is
possible.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Redial”
3. Prompt: “Dialing”

Telephone Number Input

NOTE
Practice this while parked until you are
confident you can do it while driving in a
non-taxing road situation. If you are not
completely comfortable, make all calls
from a safe parking position, and only
start driving when you can devote your
full attention to driving.

1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX

(Telephone number)”

5. Prompt: “XXXXXXXXXXX.

(Telephone number) After the beep,
continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.”

6. (Dialing)

Press the pick-up button or say “Dial”,
then go to Step 7.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.”. Then go back to
Step 3.

7. Prompt: “Dialing”

NOTE
The “Dial” command and a telephone
number can be combined.
Ex. In Step 2, say, “Dial 123-4567” then,
Steps 3 and 4 can be skipped.

Emergency calls

A call can be made to the emergency
phone number (911: U.S.A./Canada, 066:
Mexico) using the voice input command.
It may not function properly in some areas
in Mexico.
1. Press the pick-up button or talk button

with a short press.

2. Say: [Beep] “Emergency”
3. - U.S.A./Canada vehicles - Prompt:

“Dialing “911”, is this correct?”
- Mexico vehicles - Prompt: “Dialing
“066”, is this correct?”

4. Say: [Beep] “Yes”
5. Prompt: “Dialing”

Interior Features

Bluetooth®

5-98

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

▼ Receiving an Incoming Call

1. Prompt: “Incoming call, press the

pick-up button to answer”

2. To accept the call, press the pick-up

button.
To reject the call, press the hang-up
button.

▼ Hanging Up a Call

Press the hang-up button during the call. A
beep sound will confirm that call is ended.

▼ Mute

The microphone can be muted during a
call.
1. Press the talk button with a short press.
2. Say: [Beep] “Mute”
3. Prompt:“Microphone muted”

Canceling mute

1. Press the talk button with a short press.
2. Say: [Beep] “Mute off”
3. Prompt:“Microphone unmuted”

▼ Transferring a Call from

Hands-Free to a Device (Mobile
Phone)

Communication between the hands-free
unit and a device (Mobile phone) is
canceled, and the line can be switched to a
standard call using a device (Mobile
phone).
1. Press the talk button with a short press.
2. Say: [Beep] “Transfer call”
3. Prompt:“Transferred call to phone”

▼ Transferring a Call from a Device

(Mobile Phone) to Hands-Free

Communication between devices (Mobile
phone) can be switched to Bluetooth

Hands-Free.

1. Press the talk button with a short press.
2. Say: [Beep] “Transfer call”
3. Prompt:“Transferred call to Hands

Free system”

▼ Call interrupt

A call can be interrupted to receive an
incoming call from a third party.
Switch to a new incoming call using the
following methods.

Method 1

1. Press the pick-up button.
2. Prompt: “Swapping calls.”

Method 2

1. Press the talk button with a short press.
2. Say: [Beep] “Swap calls”
3. Prompt: “Swapping calls.”

NOTE



To refuse an incoming call, press the
hang-up button.



After receiving a new incoming call, the
previous call is placed on hold.

Switching calls

Switching back to the previous call can
also be done.

Method 1

1. Press the pick-up button.
2. Prompt: “Swapping calls.”

Method 2

1. Press the talk button with a short press.
2. Say: [Beep] “Swap calls”
3. Prompt: “Swapping calls.”

Three-way call function

1. Press the talk button with a short press.
2. Say: [Beep] “Join calls”

Interior Features

Bluetooth®

5-99

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

3. Prompt: “Joining calls”

Making a call using a telephone number

1. Press the talk button with a short press.
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX

(Telephone number)”

5. Prompt: “XXXXXXXXXXX.

(Telephone number) After the beep,
continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.”

6. (Dialing)

7. Prompt: “Dialing”

Making calls using the phonebook

1. Press the talk button with a short press.
2. Say: [Beep] “Call”
3. Prompt: “Name please.”
4. Say: [Beep] “XXXXX... (Ex. “John's

phone”)” (Say a voice tag registered in
the phonebook.)

5. Prompt: “Calling XXXXX... (Ex.

“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag
and phone number location registered
in phonebook).

6. Say: [Beep] “Yes”
7. Prompt: “Dialing”

Redialing function

1. Press the talk button with a short press.
2. Say: [Beep] “Redial”
3. Prompt: “Dialing”

Ending the current call

Press the hang-up button during the call.

▼ DTMF (Dual Tone Multi-Frequency

Signal) Transmission

This function is used when transmitting
DTMF via the user's voice. The receiver of
a DTMF transmission is generally a home
telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] “XXXX... send” (Say

DTMF code)

3. Prompt:“Sending XXXX... (DTMF

code)”

Interior Features

Bluetooth®

5-100

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Bluetooth

Hands-Free

(Type B)

▼ Making a Call

For Mazda Connect, making calls is
possible using any of the following six
methods:



Phonebook downloaded from
Bluetooth

device (mobile phone)

(voice recognition function can be used)



Favorites



Call record



Dialing a telephone number (voice
recognition function can be used)



“Redial” - Voice recognition command
for making a call to the latest outgoing
call record.



“Call back” - Voice recognition
command for making a call to the latest
incoming call record.

Phonebook Usage

Telephone calls can be made by saying the
contact name in the downloaded
phonebook or the name of a person whose
phone number has been registered in the
Bluetooth

Hands-Free. Refer to Import

contact (Download Phonebook).
1. Press the talk button.
2. Wait for the beep sound.
3. Say: “Call XXXXX... (Ex. “John”)

Mobile”.

4. Follow the voice guidance to place the

call.

Screen operation

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the contact

list.

3. Select the contact you would like to

call to display the details for the
contact.

4. Select the desired phone number to

make the call.

Import contact (Download Phonebook)

Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth

Hands-Free phonebook using

Bluetooth

(Automatic downloading)

The “Auto Download Contacts” setting
must be on. When hands-free is connected
to the device, the phonebook is
downloaded automatically.
Refer to Communication Settings on page
5-110.

(Manually downloading)

If the “Auto Download Contacts” setting
is off, download the phonebook using the
following procedure.
1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the contact

list.

3. Select

4. Select

to switch to the

device operation.

5. If

is selected, select

6. Download will be started from the

mobile phone.

Interior Features

Bluetooth®

*Some models.

5-101

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

NOTE



If “Import All Contacts” is performed
after saving the phonebook to the
Bluetooth

unit, the phonebook will be

overwritten.



A maximum of 1,000 contacts can be
registered to the phonebook.



Phonebook, incoming/outgoing call
record, and favorite memories are
exclusive to each mobile phone to
protect privacy.

Favorites Contacts

A maximum of 50 contacts can be
registered. It will take less time to make a
call after registering the telephone number.
In addition, you do not have to look for the
person you want to call in the phonebook.

Registering your favorites

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the favorites

list.

3. Select

4. Select

5. Select from the displayed list.

NOTE
When “Add New Contact” is selected,
information such as the selected person’s
name is also registered. In addition, when
“Add New Contact Details” is selected,
only the telephone number of the selected
person is registered.

Calling a favorite

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the favorites

list.

3. (If only one phone number is

registered to contact)
Select the contact information you
would like to call. Go to Step 5.
(If multiple phone numbers are
registered to contact)
Select the contact you would like to
call to display the screen indicating the
details for the contact. Go to Step 4.

4. Select the phone number you would

like to call.

5. Select

Deleting a favorite

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the favorites

list.

3. Select

4. Select

5. Select the contact information which

you would like to delete.

6. Select

Changing the display order of your
favorites list

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the favorites

list.

3. Select

4. Select

5. The contact can be moved after it is

selected.

6. Slide the contact or move it using the

commander switch, then select

Interior Features

Bluetooth®

5-102

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Changing contact name of your
favorites

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the favorites

list.

3. Select

4. Select

5. Select the contact to display the

keyboard screen.

6. If a new name is input and

selected, the contact name is stored.

NOTE
If the contact is long-pressed when the
favorites list is displayed, the contact
information can be edited (deleted,
moved).

Telephone Number Input

1. Select the icon on the home screen

to display the Communication screen.

2. When

is pressed, the dial pad

is displayed.

3. Input the telephone number using the

dial pad.

4. Select to make the call.

Numeral or symbol entry

Use the dial pad.
Long-press the   to input +.
Select   to delete the currently input
value.
Long-press   to delete all input values.

Redial Function

Makes a call to the last person called
(latest person on outgoing call record)
from the mobile phone/vehicle.
1. Press the talk button.
2. Wait for the beep sound.
3. Say: “Redial”

Call back Function

Makes a call to the last person who called
your (latest person on incoming call
record) mobile phone/vehicle.
1. Press the talk button.
2. Wait for the beep sound.
3. Say: “Call back”

Mobile 911 (U.S.A./Canada only)

If the vehicle is involved in a moderate to
severe collision, a call is made
automatically to 911 from the connected
device. The “Emergency Assistance Call”
setting must be on.
Refer to Communication Settings on page
5-110.

CAUTION

Though the system can be set to not call
911, doing so will defeat the purpose of the
system. Mazda recommends that the
Mobile 911 system remain activated.

Interior Features

Bluetooth®

5-103

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

NOTE



Mobile 911 is a secondary function of
the audio entertainment system.
Therefore, the mobile 911 function
does not assure that the call is always
made to 911 after an accident occurs.



A Hands-free device must be paired and
connected. The 911 operator can verify
the vehicle's position information using
the Hands-free device GPS if equipped.

1. If the vehicle is involved in a moderate

to severe collision, notification of the
call to 911 is made via audio and
screen display. To cancel the call, press

or hang-up

button within 10 seconds.

2. If

hang-up button is not pressed within
10 seconds, the call is made to 911
automatically.

Interior Features

Bluetooth®

5-104

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

▼ Receiving an Incoming Call

When an incoming call is received, the incoming call notification screen is displayed. The
“Incoming Call Notifications” setting must be on.
Refer to Communication Settings on page 5-110.
To accept the call, press the pick-up button on the audio control switch or select

the screen.
To reject the call, press the hang-up button on the audio control switch or select

on the

screen.
The following icons are displayed on the screen during a call. Icons which can be used
differ depending on use conditions.

Icon

Function

Displays the Communication menu.

Ends the call.

Transferring a call from hands-free to a mobile phone
Communication between the Bluetooth

unit and a device (mobile phone) is canceled,

and an incoming call will be received by the device (mobile phone) like a standard call.
Transferring a call from a device (mobile phone) to hands-free
Communication between devices (mobile phone) can be switched to Bluetooth

Hands-Free.
Mute
The microphone can be muted during a call.
When selected again, the mute is canceled.
To make a 3-way call, select the contacts from the following:

: Call History is displayed.

: The phonebook is displayed.

: The dial pad is displayed. Input the phone number.

The device may be unusable depending on the contractual content.

The call on hold is made to make a 3-way call.
The device may be unusable depending on the contractual content.

Switches the call on hold.

DTMF (Dual Tone Multi-Frequency Signal) Transmission
This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF
transmission is generally a home telephone answering machine or a company's automated
guidance call center.
Input the number using a dial pad.

Interior Features

Bluetooth®

5-105

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

NOTE



If the ignition is switched off during a
hands-free call, the line is transferred to
the device (Mobile phone)
automatically.



If the DTMF code has two or more
digits or symbols, each one must be
transmitted individually.

▼ Call Interrupt

A call can be interrupted to receive an
incoming call from a third party.
When

is selected or the

pick-up button on the steering wheel is
pressed, the current call is held and the
system switches to the new incoming call.
When

is selected, the current

call is ended and the system switches to
the new incoming call (GSM network
only).
When

is selected or the hang-up

button on the steering wheel is pressed, an
incoming call is refused.

NOTE



The function may not be available
depending on the contractual content of
the mobile device.



The function may not be operable
depending on the type of the telephone
network and the mobile device.

▼ Receiving and Replying to Messages

(available only with E-mail/SMS
compatible phones)

SMS (Short Message Service) messages,
and E-mail received by connected devices
can be downloaded, displayed, and played
(read by the system).
Additionally, replies can also be made to
calls and messages in the received
messages.

Downloading messages

Up to 20 new messages can be
downloaded and displayed from a
connected device.

NOTE
For E-mail, 20 messages for each account
can be downloaded.

(Automatic downloading)

The “Auto Download Email” (E-mail) or
“Auto Download Text Message” (SMS)
setting must be on. A message is
downloaded automatically when the
Bluetooth

unit is connected to the device.

Refer to Communication Settings on page
5-110.

(Manually downloading)

When the “Auto Download Email”
(E-mail) or “Auto Download Text
Message” (SMS) setting is off, the
message is downloaded using the
following procedure.
1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display

the Inbox.

3. Select

Interior Features

Bluetooth®

5-106

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

4. Download will be started from the

mobile phone.

NOTE



Attached data is not downloaded.



Messages up to 1 kilobyte (E-mail)/
140-bytes (SMS) can be downloaded.



A message list is created for each
device.



If the connected device does not
correspond to MAP 1.0, the AT
command is used to download. The
downloaded message indicates that it is
already read.



Downloading using the AT command
may not function depending on the
connected device.



If an iPhone is connected, the following
functions cannot be used.



Downloading past messages



Replying to messages



iPhone is a trademark of Apple Inc.,
registered in the U.S. and other
countries.

Receiving messages

(Method 1)

When a device receives a message, a
message received notification is displayed.
The “Email Notifications” (E-mail) or
“Text Notifications” (SMS) setting must
be on.
Refer to Communication Settings on page
5-110.
Select

and display the message.

(Method 2)

1. Select the icon on the home screen

to display the Communication screen.

2. Select

and display the new

message list for E-mail and SMS.

3. Select the message you would like to

display.

Interior Features

Bluetooth®

5-107

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

The following icons are displayed in the lower part of the details on the message. Icons
which can be used differ depending on use conditions.

Icon

Function

Displays the Communication menu.

Displays the inbox.

Plays back a message.
When selected again, playback is temporarily stopped.

Displays the previous message.

Displays the next message.

Only replies to the sender of the currently displayed message.
Select the sentence on the displayed reply screen and select the sentence for sending from
the preset message.
Select

(Only E-mail)
Replies to all members including CC.
Select the sentence on the displayed reply screen and select the sentence for sending from
the preset message.
Select

Makes a call to a person who sent a message.
For E-mail, this function may not work depending on the device.

Deletes a message.
The messages stored in a device is also deleted.

NOTE
Up to three preset messages can be selected.

Interior Features

Bluetooth®

5-108

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Example of use (verify unread E-mail)

1. Select the icon on the home screen

to display the Communication screen.

2. Select

to display the inbox.

3. Select the unread message displayed in

bold.

4. The details of the message are

displayed and replying to the message,
making a call, or playback can be
performed.

Changing account for displaying
(E-mail only)

1. Select

2. Select the account which you would

like to display. Only the messages for
the selected account are displayed in
the inbox.

Editing preset messages

1. Select the icon on the home screen

to display the Communication screen.

2. Select

3. Select

4. Select the preset message which you

would like to edit. The keyboard
screen is displayed.

5. When the message is input and is

selected, the message is stored as a
preset message.

NOTE



Select the

icon to change the

language.



Select the icon to switch between
capitalized and lower-case characters.



Select the

icon to return to the

previous screen without storing the edit.

Interior Features

Bluetooth®

5-109

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

▼ Communication Settings

Select the icon on the home screen to display the Communication screen.
Select

to change the setting.

Item

Setting

Function

Bluetooth

—

Go to Bluetooth

setting menu.

Refer to Bluetooth

Preparation (Type B) on page 5-87.

Incoming Call Notifi-
cations

On/Off

Notifies when an incoming call is received.

Auto Download Text
Message

On/Off

Downloads SMS automatically when the Bluetooth

unit is connected

to the device.

Text Notifications

On/Off

Notifies when a new SMS is received.

Auto Download
Email

On/Off

Downloads E-mail automatically when the Bluetooth

unit is connect-

ed to the device.

Email Notifications

On/Off

Notifies when a new Email is received.

Auto Download Call
History

On/Off

Downloads Call History automatically when the Bluetooth

unit is

connected to the device.

Auto Download Con-
tacts

On/Off

Downloads the phonebook automatically when the Bluetooth

unit is

connected to the device.

Ringtone

Car/Phone/Off Changes the ringtone setting.

Phone Volume

Adjusts using

the slider.

Adjusts the conversation volume.

VR and Ringtone

Adjusts using

the slider.

Adjusts the voice guidance and ringtone volume.

Contacts Display Or-
der

First Name, Last

Name

Displays the contact information in alphabetical order of the first
name.

Last Name, First

Name

Displays the contact information in alphabetical order of the last
name.

Edit Preset Messages

—

Edits the preset message.
Refer to Receiving and Replying to Messages (available only with
E-mail/SMS compatible phones) on page 5-106.

Emergency Assistance
Call

On/Off

Mobile Utilizes the Mobile 911 function.

Restore Factory set-
tings

—

Initializes all Communication Settings.

1 Depending on the device, it may be necessary to acquire download permission on the device side.

Interior Features

Bluetooth®

5-110

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Bluetooth

Audio (Type

Applicable Bluetooth

specification

(Recommended)
Ver. 2.0

Response profile



A2DP (Advanced Audio Distribution
Profile) Ver. 1.0



AVRCP (Audio/Video Remote Control
Profile) Ver. 1.0/1.3

A2DP is a profile which transmits only
audio to the Bluetooth

unit. If your

Bluetooth

audio device corresponds only

to A2DP, but not AVRCP, you cannot
operate it using the control panel of the
vehicle's audio system. In this case, only
the operations on the mobile device are
available the same as when a portable
audio device for a non-compliant
Bluetooth

device is connected to the

AUX terminal.

Function

A2DP

AVRCP

Ver. 1.0 Ver. 1.3

Playback

—

Pause

—

File (Track) up/down

—

Reverse

—

Fast-forward

—

Text display

—

X: Available
—: Not available

NOTE



The battery consumption of Bluetooth

audio devices increases while
Bluetooth

is connected.



If a general mobile phone device is USB
connected during music playback over
the Bluetooth

connection, the

Bluetooth

connection is disconnected.

For this reason, you cannot have music
playback over a Bluetooth

connection

and music playback using a USB
connection at the same time.



The system may not operate normally
depending on the Bluetooth

audio

device.

Interior Features

Bluetooth®

*Some models.

5-111

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

▼ How to Use the Bluetooth

Audio

System

Switching to Bluetooth

audio mode

To listen to music or voice audio recorded
to a Bluetooth

audio device, switch to the

Bluetooth

audio mode to operate the

audio device using the audio system
control panel. Any Bluetooth

audio

device must be paired to the vehicle's
Bluetooth

unit before it can be used.

Refer to Bluetooth

Preparation (Type A)

on page 5-72.
1. Turn on the Bluetooth

audio device's

power.

2. Switch the ignition to ACC or ON.

Make sure that the “ ” symbol is
displayed in the audio display. The
symbol is not displayed if an un-paired
Bluetooth

audio device is being used

or the vehicle's Bluetooth

unit has a

malfunction.

NOTE
Some Bluetooth

audio devices need a

certain amount of time before the “ ”
symbol is displayed.

3. Press the media button (

) to

switch to the Bluetooth

audio mode

and start playback.

If the current device version is lower
than AVRCP Ver. 1.3: “BT Audio” is
displayed.
If the current device is AVRCP Ver. 1.3:
The playback time is displayed.

NOTE



If the Bluetooth

audio device does not

begin playback, press the Play/Pause
button (4).



If a call is received on a hands-free
mobile phone during playback from the
Bluetooth

audio device, the playback is

stopped. Playback from the Bluetooth

audio device resumes after the call ends.

Playback

1. To listen to a Bluetooth

audio device

over the vehicle's speaker system,
switch the mode to Bluetooth

audio

mode. (Refer to “Switching to
Bluetooth

audio mode”)

2. To stop playback, press the Play/Pause

button (4).

3. Press the button again to resume

playback.

Selecting a file (track)

Selects the next file (track)

Short-press the track up button (

Selects the beginning of the current file
(track)

Short-press the track down button (

Fast-forward/Reverse (AVRCP Ver. 1.3)

Fast-forward

Press and hold the fast-forward button
(

Reverse

Press and hold the reverse down button
(

Interior Features

Bluetooth®

5-112

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Mazda 3 Hatchback (2018 year). Instruction - part 24