Lexus LX600 (2022 year). Manual in english - page 4

(Flashes)

Brake hold operated indi-
cator

(



Low fuel level warning light
(



Tire pressure warning
light

(

Driver’s and front passen-
ger’s seat belt reminder
light (



P.503)

Rear passengers’ seat belt
reminder light (

P.503)

WARNING

■

If a safety system warning light does

not come on

Should a safety system light such as the

ABS and SRS warning light not come on

when you start the engine, this could

mean that these systems are not avail-

able to help protect you in an accident,

which could result in death or serious

injury. Have the vehicle inspected by

your Lexus dealer immediately if this

occurs.

2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

The indicators inform the driver of the
operating state of the vehicle’s various
systems.

Indicators

Turn signal indicator
(



P.196)

(U.S.A.)

Headlight indicator
(



P.202)

(Canada)

Tail light indicator
(



P.202)

Headlight high beam indi-
cator (



P.204, 207)

Automatic High Beam indi-
cator (



P.205)

Fog light indicator
(



P.208)

PCS warning light

*1, 2

(



P.222)

(White)

LTA indicator

(

P.234)

(Green)

LTA indicator

(

P.219,

234)

(Orange)

LTA indicator

(

P.234)

Dynamic radar cruise con-
trol indicator (

Cruise control indicator
(



Cruise control “SET” indi-
cator (



BSM outside rear view mir-
ror indicators

*1, 4

(



P.257)

BSM OFF indicator

(



P.257)

RCTA OFF indicator

*1, 2

(



P.268)

RCD OFF indicator

(



P.272)

Intuitive parking assist OFF
indicator

*2, 5

(



P.262)

PKSB OFF indicator

*1, 2

(



P.276)

Eco Driving Indicator
Light

(

P.83)

Stop & Start indicator

(



P.252)

Stop & Start cancel indica-
tor

*1, 2

(



P.252)

(Flashes)

Slip indicator light

(



P.366)

VSC OFF indicator

*1, 2

(



P.366)

Downhill assist control sys-
tem indicator

(

P.363)

Turn Assist indicator
(



P.356)

Crawl Control indicator

(



P.356)

Crawl Control mode dis-
play (



P.356)

Easy access mode indica-
tor

(

P.349)

Low speed four-wheel
drive indicator (



P.354)

2-1. Instrument cluster

: These lights turn on when the engine

switch is turned to ON to indicate that a
system check is being performed. They
will turn off after the engine is started, or
after a few seconds. There may be a
malfunction in a system if the lights do
not turn on, or turn off. Have the vehicle
inspected by your Lexus dealer.

: The light comes on when the system is

turned off.

: Depending on the operating condition,

the color and illuminating/flashing state
of the light change.

: This light illuminates on the outside rear

view mirrors.

: Intuitive parking assist OFF indicator

turns on when the engine switch is
turned to ON while the intuitive parking
assist function is on. It will turn off after a
few seconds.

: This light illuminates on the overhead

console.

: This light illuminates on the multi-infor-

mation display with a message.

: When the outside temperature is

approximately 37°F (3°C) or lower,
the indicator will flash for approximately
10 seconds, then stay on.

: Vehicles without Adaptive Variable

Suspension system

*10

: Vehicles with Adaptive Variable Sus-

pension system

Center differential lock
indicator (



P.354)

(U.S.A.)

Parking brake indicator
(



P.197)

(Canada)

Parking brake indicator
(



P.197)

Brake hold standby indica-
tor

(



P.200)

Brake hold operated indi-
cator

(



P.200)

(U.S.A.)

“AIR BAG ON/OFF” indi-
cator lights

*1, 6

(



P.44)

(Canada)

“AIR BAG ON/OFF” indi-
cator lights

*1, 6

(



P.44)

Smart access system with
push-button start indica-
tor

(

P.188)

Low outside temperature
indicator

(



P.79)

Eco drive mode indicator
(



Sport mode indicator

(



Comfort mode indica-
tor

*10

: (



SPORT S mode indica-
tor

*10

: (



SPORT S+ mode indica-
tor

*10

: (



Custom mode indica-
tor

*10

: (



AUTO mode indicator
(



DIRT mode indicator
(



SAND mode indicator
(



MUD mode indicator
(



DEEP SNOW mode indi-
cator (

ROCK mode indicator
(



2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

■

BSM (Blind Spot Monitor) outside rear

view mirror indicators

In order to confirm operation, the BSM out-

side rear view mirror indicators illuminate in

the following situations:

●

When the engine switch is turned to ON
while the BSM function is enabled on

of the multi-information display.

●

When the BSM function is enabled on

of the multi-information display while

the engine switch is in ON.

If the system is functioning correctly, the

BSM outside rear view mirror indicators

will turn off after a few seconds.

If the BSM outside rear view mirror indica-

tors do not illuminate or do not turn off,

there may be a malfunction in the system.

If this occurs, have the vehicle inspected by

your Lexus dealer.

2-1. Instrument cluster

■

Locations of gauges and meters

The units of measure may differ depending on the intended destination of the vehicle.

Engine oil pressure gauge

Displays the engine oil pressure

Outside temperature (

P.79)

Tachometer

Displays the engine speed in revolutions per minute

Speedometer

Displays the vehicle speed

Clock

The GPS clock’s time is automatically adjusted by utilizing GPS time information. For
details, refer to the “MULTIMEDIA OWNER’S MANUAL”.

AHC display (if equipped)

Display the status of AHC (Active Height Control Suspension) (



P.346)

Voltmeter

Displays the charge state

Fuel gauge

Displays the quantity of fuel remaining in the tank

Shift position and shift range/gear position

Gauges and meters

Meter display

B
C

2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

Displays the selected shift position or selected shift range/gear position (



P.192)

Multi-information display

Presents the driver with a variety of driving-related data (



P.81)

Displays warning messages if a malfunction occurs (



P.506)

Odometer, trip meter and oil maintenance

Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset. Trip
meters “A” and “B” can be used to record and display different distances independently.
Oil maintenance:
Displays the distance until the next engine oil change.

Engine coolant temperature gauge

Displays the engine coolant temperature

■

Outside temperature display

●

In the following situations, the correct

outside temperature may not be dis-

played, or the display may take longer

than normal to change.

• When stopped, or driving at low speeds

(less than 12 mph [20 km/h])

• When the outside temperature has

changed suddenly (at the entrance/exit

of a garage, tunnel, etc.)

●

When “--” or “E” is displayed, the system

may be malfunctioning.

Take your vehicle to your Lexus dealer.

●

Displays the outside temperature within

the range of -40°F (-40°C) to 140°F

(60°C).

●

When the outside temperature is

approximately 37°F (3°C) or lower, the
indicator

will flash for approximately

10 seconds, then stay on.

■

Liquid crystal display



P.82

WARNING

■

The information display at low tem-

peratures

Allow the interior of the vehicle to warm

up before using the liquid crystal infor-

mation display. At extremely low tem-

peratures, the display monitor may

respond slowly, and display changes may

be delayed.
For example, there is a lag between the

driver’s shifting and the new gear num-

ber appearing on the display. This lag

could cause the driver to downshift

again, causing rapid and excessive

engine braking and possibly an accident

resulting in death or injury.

NOTICE

■

To prevent damage to the engine and

its components

●

Do not let the indicator needle of the

tachometer enter the red zone, which

indicates the maximum engine speed.

2-1. Instrument cluster

Switches the items of the odometer,
trip meter A, trip meter B and oil main-
tenance by pressing the “ODO TRIP”
switch.
When the trip meter is displayed,
pressing and holding the switch will
reset the trip meter.

■

Pop-up display

In some situations the following will be
temporarily displayed:



Stop & Start system operation time
(current) (

P.252)



Stop & Start system operating state
(



P.255)



Distance until next engine oil
change

When a warning message indicating that
oil maintenance should be performed soon
or is required is displayed.

The brightness of the instrument panel
lights can be adjusted.

Darker

Brighter

NOTICE

●

The engine may be overheating if the

engine coolant temperature gauge is

in the red zone (“H”). In this case,

immediately stop the vehicle in a safe

place, and check the engine after it has

cooled completely. (



P.528)

■

Voltmeter

When the voltmeter indicates 19 V or

higher, or 9 V or lower while the engine

is running, there may be a battery or

charging system malfunction. Have the

vehicle inspected at your Lexus dealer.

■

Engine oil pressure gauge

When the value of the engine oil pres-

sure gauge drops while the engine is run-

ning, stop the vehicle in a safe place

immediately and check the amount of

engine oil. (



P.458)

When the oil pressure drops even

though the engine oil amount has not

decreased, or if the oil pressure does not

increase when engine oil is added, con-

tact your Lexus dealer, as there may be a

problem with the lubrication system.

Using the “ODO TRIP” switch

Changing the instrument panel
light brightness

2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

■

Meter panel brightness adjustment

The meter panel brightness levels when the

surroundings are bright (daytime etc.) and

dark (nighttime etc.) can be adjusted indi-

vidually.

■

Display

By selecting menu icons on the multi-
information display, a variety of driv-
ing-related information can be dis-
played. The multi-information display
can also be used to change display set-
tings and other vehicle settings.
Warning or suggestion/advice pop-up
displays are also displayed in certain
situations.

■

Menu icons

The menu icons will be displayed by
pressing

of the meter con-

trol switch.

Multi-information display

Display and menu icons

Driving information display
(



P.82)

Navigation system-linked dis-
play (

Audio system-linked display
(



Driving support system infor-
mation display (



Warning message display
(



P.506)

Settings display (

2-1. Instrument cluster

■

Liquid crystal display

Small spots or light spots may appear on the

display. This phenomenon is characteristic

of liquid crystal displays, and there is no

problem continuing to use the display.

The multi-information display is oper-
ated using the meter control switches.

: Select menu icons

: Change displayed con-

tent, scroll up/down the screen and
move the cursor up/down

Press: Enter/Set
Press and hold: Reset

Return to the previous screen

Call sending/receiving and history
display

Linked with the hands-free system, sending
or receiving call is displayed. For details
regarding the hands-free system, refer to
the “MULTIMEDIA OWNER’S MAN-
UAL”.

■

Display items

Press

of the meter control

switch and select

. Then press

to display the following items:



Drive information 1



Drive information 2



Eco Driving Indicator



Tire pressure (

P.467)



Display off

■

Drive information 1/Drive informa-
tion 2

Displays drive information such as the
following:

Use the displayed values as a reference
only.



Drive information 1

• Current fuel consumption
• Average fuel economy (after reset)



Drive information 2

• Distance (driving range)
• Average vehicle speed (after reset)

Displayed items (listed below) can be
changed on

. (





Current fuel consumption

Bar type: Displays instantaneous current

WARNING

■

Caution for use while driving

●

When operating the multi-information

display while driving, pay extra atten-

tion to the safety of the area around

the vehicle.

●

Do not look continuously at the multi-

information display while driving as

you may fail to see pedestrians, objects

on the road, etc. ahead of the vehicle.

■

The information display at low tem-

peratures

P.79

Changing the meter display

Content of driving information

2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

fuel consumption



Average fuel economy

After reset: Displays average fuel con-
sumption since the display was reset

After start: Displays average fuel con-
sumption since engine start
After refuel: Displays average fuel con-
sumption since refuel



Average vehicle speed

After reset: Displays average vehicle
speed since the display was reset

After start: Displays average vehicle speed
since engine start



Elapsed time

After reset: Displays elapsed time since the
display was reset

After start: Displays elapsed time since
engine start



Distance

Driving range: Displays driving range with
remaining fuel

*2, 3

After start: Displays the distance driven
since engine start



Other

Blank: No item

: To reset, display the desired item and

press and hold

of the meter control

switch.

: This distance is computed based on

your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.

: When only a small amount of fuel is

added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without

turning the engine switch off, the display
may not be updated.

■

Eco Driving Indicator

Eco Driving Indicator Light

During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or when
the vehicle is stopped, the light turns off.

Eco Driving Indicator Zone Display

Suggests the Zone of Eco driving with cur-
rent Eco driving ratio based on accelera-
tion.

Eco driving ratio based on acceler-
ation

If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco Driv-
ing Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light
will turn off.

Zone of Eco driving

■

Eco Driving Indicator

Eco Driving Indicator will not operate

under the following conditions:

●

The shift position is in any position other

than D.

2-1. Instrument cluster

●

A paddle shift switch is operated.

●

The driving mode is set to sport mode

(vehicles without Adaptive Variable Sus-

pension system) or SPORT S/SPORT S+

mode (vehicles with Adaptive Variable

Suspension system).

●

The driving mode is set to custom mode

(vehicles with Adaptive Variable Suspen-

sion system) and the powertrain control

is set to power. (

●

The vehicle speed is approximately 80

mph (130 km/h) or higher.

Select to display the following naviga-
tion system-linked information.



Route guidance to destination



Compass display

Select to enable selection of an audio
source or track on the meter using the
meter control switches.

Select to display the operational status
of the following systems:



LTA (Lane Tracing Assist)
(

P.229)



Dynamic radar cruise control with
full-speed range (



RSA (Road Sign Assist) (if
equipped) (

P.239)

Vehicle settings and the content dis-
played on the screen can be changed
by using the meter control switches.

■

Setting procedure

Press

of the meter con-

trol switches and select

Press

of the meter con-

trol switches, select the item, and
press .

Press

of the meter con-

trol switches, select the desired set-
ting, and press

After changing the settings, press

of the meter control switches.

■

Meter display settings that can be
changed



Language

Select to change the language displayed.



Units

Select to change the units of measure dis-
played.



Speedometer display

Select to set the display of the speedome-
ter to digital/analog/both digital and ana-
log.



Drive information 1/Drive informa-
tion 2

Select to select up to 2 items (

P.82) that

will be displayed on each Drive information
screen (Drive information 1 screen and
Drive information 2 screen) respectively.



Pop-up display

Select to enable/disable pop-up displays

Navigation system-linked dis-
play

Audio system-linked display

Driving support system informa-
tion display

Settings display

2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

for each relevant system.



Eco Driving Indicator Light

Select to enable/disable the Eco Driving
Indicator Light.



Default setting

Select to reset the meter display settings to
the default setting.

■

Vehicle functions and settings that
can be changed

P.552

■

Suspension of the settings display

●

Some settings cannot be changed while

driving. When changing settings, park

the vehicle in a safe place.

●

If a warning message is displayed, opera-

tion of the settings display will be sus-

pended.

Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,

use the meter control switches.

■

Suggestion to turn on the head-
lights

If the headlight switch is in other than

, and the vehicle speed is 3

mph (5 km/h) or higher for a certain
amount of time when the surroundings
are dark, a suggestion message will be
displayed.

■

Suggestion to turn off the head-
lights

If the headlights are left on for a certain
amount of time after the engine switch
has been turned off, a suggestion mes-
sage will be displayed.

When the headlight switch is in

The message asking if you wish to turn
the headlights off is displayed. To turn
the headlights off, select “Yes”.

If the driver’s door is opened after the
engine switch is turned off, this suggestion
message will not be displayed.

■

Customization

Some functions can be customized. (Cus-

tomizable features:

P.88)/Navigation system-linked dis-

P.552)

WARNING

■

Cautions during setting up the dis-

play

As the engine needs to be running

during setting up the display, ensure that

the vehicle is parked in a place with ade-

quate ventilation. In a closed area such as

a garage, exhaust gases including harm-

ful carbon monoxide (CO) may collect

and enter the vehicle. This may lead to

death or a serious health hazard.

NOTICE

■

During setting up the display

To prevent battery discharge, ensure

that the engine is running while setting up

the display features.

Suggestion function

2-1. Instrument cluster

: If equipped

Illustrations used in this text are intended as examples, and may differ from the image that is
actually displayed by the head-up display.

Driving support system display area (



play area

Displays the following items which are linked to the navigation system:
• Route guidance to destination
• Street name
• Compass (heading-up display)

Shift position/speed limit/RSA (Road Sign Assist) display area

Displays the following items:
• Shift position and shift range/gear position (

P.192)

• Speed limit of the current road (linked to the navigation system) (U.S.A. only)
• RSA (Road Sign Assist) display (if equipped) (



P.239)

Speedometer

Eco Driving Indicator/Tachometer display area (

P.89)

■

Head-up display will operate when

The engine switch is in ON.

■

When using the head-up display

The head-up display may seem dark or hard

to see when viewed through sunglasses,

Head-up display

The head-up display projects a variety of driving-related information and the
operating state of the driving support systems on the windshield.

System components

C
D

2-1. Instrument cluster

Veh
icl

e status

inf

ormatio

n and indica

especially polarized sunglasses. Adjust the

brightness of the head-up display or

remove your sunglasses.

■

Street name display

Only street names which are included in the

map data will be displayed.

The following settings can be changed
on

of the multi-information display.

(



P.81)



Enabling/disabling the head-up dis-
play

Select to enable/disable the head-up dis-
play.



Brightness and vertical position of
the head-up display

Select to adjust the brightness or vertical
position of the head-up display.



Tachometer Settings

Select to display the following items:
• Blank
• Eco Driving Indicator
• Tachometer



Display content

Select to enable/disable the following
items:
• Navigation display

• Driving Assist display

• Compass
• Audio system operation status

: Make sure to enable this display when

using the driving support systems



Display angle

Select to adjust the angle of the head-up
display.

■

Enabling/disabling of the head-up dis-

play

If the head-up display is disabled, it will

remain disabled when the engine switch is

turned off then back to ON.

WARNING

■

When using the head-up display

●

Check that the position and brightness

of the head-up display image does not

interfere with safe driving. Incorrect

adjustment of the image’s position or

brightness may obstruct the driver’s

view and lead to an accident, resulting

in death or serious injury.

●

Do not continuously look at the head-

up display while driving as you may fail

to see pedestrians, objects on the

road, etc. ahead of the vehicle.

NOTICE

■

Head-up display projector

●

Do not place any drinks near the head-

up display projector. If the projector

gets wet, electrical malfunctions may

result.

●

Do not place anything on or put stick-

ers onto the head-up display projector.

Doing so could interrupt head-up dis-

play indications.

●

Do not touch the inside of the head-up

display projector or thrust sharp edges

or the like into the projector.

Doing so could cause mechanical mal-

functions.

Using the head-up display

2-1. Instrument cluster

■

Display brightness

The brightness of the head-up display can
be adjusted on

of the multi-information

display. Also, it is automatically adjusted

according to the ambient brightness.

■

Head-up display automatic position

adjustment

If the display position is recorded into mem-

ory, the head-up display will be automati-

cally adjusted to the desired position.

(

P.159)

■

When the battery is disconnected

The customize settings of the head-up dis-

play will be reset.

Displays the operational status of the
following systems:



LTA (Lane Tracing Assist)
(

P.229)



Dynamic radar cruise control with

full-speed range (

