|
|
86 2-1. Instrument cluster LEXUS LS500 Owner's Manual ■ Enabling/disabling the head-up dis- Press the HUD switch. ■ Changing settings of the head-up The following settings can be changed of the multi-information display. ( Brightness and vertical position of Select to adjust the brightness or vertical Tachometer/Eco Driving Indicator Select to display the tachometer, Eco Driv- Display content Select to enable/disable the following • Route guidance to destination/street name • Driving support system display * • Compass (heading-up display) * : Make sure to enable this display when using the driving support systems Display angle Select to adjust the angle of the head-up ■ Enabling/disabling of the head-up dis- play If the head-up display is disabled, it will remain disabled when the engine switch is turned off then back to IGNITION ON mode. ■ Display brightness The brightness of the head-up display can of the multi-information display. Also, it is automatically adjusted according to the ambient brightness. ■ Head-up display automatic position adjustment If the display position is recorded into mem- ory, the head-up display will be automati- cally adjusted to the desired position. ( ■ When the battery is disconnected The customize settings of the head-up dis- play will be reset. Using the head-up display WARNING ■ Caution for changing settings of the head-up display As the engine needs to be running while changing the settings of the head-up dis- play, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monox- ide (CO) may collect and enter the vehi- cle. This may lead to death or a serious health hazard. NOTICE ■ When changing the settings of the head-up display To prevent battery discharge, ensure that the engine is running while the changing the settings of the head-up display. |