|
|
|
377 6 6-3. Do-it-yourself maintenance M ain ten an ce a ca re inserting it and turning the bulb 5 Reconnect the connector. After reconnecting the connector, turn on the rear fog light to visually check that there is no light leaking from the bulb base. WARNING Q Replacing light bulb O Turn off the light. Do not attempt to replace the bulb immediately after turning off the light. The bulb become very hot and may cause burns. O Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb. Also, if the bulb is scratched or dropped, it may blow out or crack. O Fully install light bulb and any parts used to secure it. Failure to do so may result in heat damage, fire, or water entering the light unit. This may dam- age the light or cause condensation to build up on the lens. Q To prevent damage or fire O Make sure bulb is fully seated and locked. O Check the wattage of the bulb before installing to prevent heat damage. |