Content .. 28 29 30 31 ..

LEXUS RX 450HL (2019 year). Instruction - part 30

480

5-11. Bluetooth

RX450h_RX450hL_U



When using the phonebook



When using the Bluetooth

message function

Phonebook data cannot be transferred manually/automatically.

The profile version of the connected cellular phone may not be compatible with trans-

ferring phonebook data.

 For a list of specific devices which operation has been confirmed on this system,

check with your Lexus dealer or the following website:

http://www.lexus.com/MobileLink

Automatic phonebook transfer function on this system is set to off.

 Set automatic phonebook transfer function on this system to on. (P. 474)

Passcode has not been entered on the cellular phone.

 Enter the passcode on the cellular phone if requested (default passcode: 1234).

Transfer operation on the cellular phone has not completed.

 Complete transfer operation on the cellular phone (approve transfer operation

on the phone).

Phonebook data cannot be edited.

Automatic phonebook transfer function on this system is set to on.

 Set automatic phonebook transfer function on this system to off. (P. 474)

Messages cannot be viewed.

Message transfer is not enabled on the cellular phone.

 Enable message transfer on the cellular phone (approve message transfer on the

phone).

Automatic transfer function on this system is set to off.

 Set automatic transfer function on this system to on. (P. 474)

New message notifications are not displayed.

Notification of SMS/MMS/E-mail reception on this system is set to off.

 Set notification of SMS/MMS/E-mail reception on this system to on. (P. 473)

Automatic message transfer function is not enabled on the cellular phone.

 Enable automatic transfer function on the cellular phone.

481

5-11. Bluetooth

xus
Dis
play Audi

o syst

RX450h_RX450hL_U



In other situations

Even though all conceivable measures have been taken, the symptom status does not

change.

The cellular phone is not close enough to this system.

 Bring the cellular phone closer to this system.

The cellular phone is the most likely cause of the symptom.

 Turn the cellular phone off, remove and reinstall the battery pack, and then

restart the cellular phone.

 Enable the cellular phone’s Bluetooth

connection.

 Stop the cellular phone’s security software and close all applications.

 Before using an application installed on the cellular phone, carefully check its

source and how its operation might affect this system.

482

5-11. Bluetooth

RX450h_RX450hL_U

■

When using the Bluetooth

audio system

●

In the following situations, the system may not function.
• If the portable audio player is turned off

• If the portable audio player is not connected

• If the portable audio player’s battery is low

●

There may be a delay if a cellular phone connection is made during Bluetooth

audio

play.

●

Depending on the type of portable audio player that is connected to the system, opera-

tion may differ slightly and certain functions may not be available.

■

When using the hands-free system

●

The audio system is muted when making a call.

●

If both parties speak at the same time, it may be difficult to hear.

●

If the received call volume is overly loud, an echo may be heard.

If the Bluetooth

phone is too close to the system, quality of the sound may deteriorate

and connection status may deteriorate.

●

In the following situations, it may be difficult to hear the other party:
• When driving on unpaved roads

• When driving at high speeds

• If a window is open

• If the air conditioning is blowing directly on the microphone

• If there is interference from the network of the cellular phone

●

Depending on the type phone, certain functions may not be available.

■

Conditions under which the system will not operate

●

If using a cellular phone that does not support Bluetooth

●

If the cellular phone is turned off

●

If you are outside of cellular phone service coverage

●

If the cellular phone is not connected

●

If the cellular phone’s battery is low

●

When outgoing calls are controlled, due to heavy traffic on phone lines, etc.

●

When the cellular phone itself cannot be used

●

When transferring phonebook data from the cellular phone

Bluetooth

483

5-11. Bluetooth

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

■

Bluetooth

antenna

The antenna is built into the display.

If the portable audio player is behind the seat or in the glove box or console box, or is

touching or covered by metal objects, the connection status may deteriorate.

If the cellular phone is behind the seat or in the console box, or touching or covered by

metal objects, the connection status may deteriorate.

■

Battery charge/signal status

●

This display may not correspond exactly with the portable audio player or cellular

phone itself.

●

This system does not have a charging function.

●

The portable audio player or cellular phone battery will be depleted quickly when the

device is connected to Bluetooth

■

When using the Bluetooth

audio and hands-free system at the same time

The following problems may occur.

●

The Bluetooth

audio connection may be interrupted.

●

Noise may be heard during Bluetooth

audio playback.

■

About the contact in this system
The following data is stored for every registered cellular phone. When another phone is

connecting, you cannot read the registered data.

●

Contact data

●

Call history

●

Favorite

●

Message

When removing a Bluetooth

phone from the system, the above-mentioned data is also

deleted.

■

About Bluetooth

484

5-11. Bluetooth

RX450h_RX450hL_U

■

Compatible models
The Bluetooth

audio system supports portable audio players with the following specifi-

cations

●

Bluetooth

specifications:

Ver. 2.0 or higher (Recommended: Ver. 3.0 +EDR or higher)

●

Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher

(Recommended: Ver. 1.3 or higher)

This is a profile to transmit stereo audio or high quality sound to the audio system.

• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher

(Recommended: Ver. 1.5 or higher)

This is a profile to allow remote control the A/V equipment.

However, please note that some functions may be limited depending on the type of por-

table audio player connected.
The hands-free system supports cellular phones with the following specifications.

●

Bluetooth

specification:

Ver. 2.0 or higher (Recommended: Ver. 3.0 +EDR or higher)

●

Profiles:
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.6 or higher)

This is a profile to allow hands-free phone calls using a cellular phone or head set. It

has outgoing and incoming call functions.

• OPP (Object Push Profile) Ver. 1.1 or higher (Recommended: Ver. 1.2)

This is a profile to transfer phonebook data. When a Bluetooth

compatible cellular

phone has both PBAP and OPP, OPP cannot be used.

• PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Recommended: Ver. 1.1)

This is a profile to transfer phonebook data.

• MAP (Message Access Profile) Ver.1.0 or higher

This is a profile to using phone message.

If the cellular phone does not support HFP, you cannot register it with the hands-free sys-

tem. OPP, PBAP or MAP services must be selected individually.

■

Reconnecting the portable audio player
If the portable audio player is disconnected due to poor reception when the power

switch is in ACCESSORY or ON mode, the system automatically reconnects the porta-

ble audio player.
If you have switched off the portable audio player yourself, follow the instructions below

to reconnect:

●

Select the portable audio player again

●

Enter the portable audio player

■

When you sell your car
Be sure to delete your personal data. (

P. 415)

485

5-11. Bluetooth

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

■

Certification

486

5-11. Bluetooth

RX450h_RX450hL_U

487

5-11. Bluetooth

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

WARNING

■

While driving
Do not operate the portable audio player, cellular phone or connect a device to the

Bluetooth

system.

■

Caution regarding interference with electronic devices

●

Your audio unit is fitted with Bluetooth

antennas. People with implantable cardiac

pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardio-

verter defibrillators should maintain a reasonable distance between themselves and

the Bluetooth

antennas. The radio waves may affect the operation of such devices.

●

Before using Bluetooth

devices, users of any electrical medical device other than

implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or

implantable cardioverter defibrillators should consult the manufacturer of the device

for information about its operation under the influence of radio waves. Radio waves

could have unexpected effects on the operation of such medical devices.

NOTICE

■

When leaving the vehicle
Do not leave your portable audio player or cellular phone in the vehicle. The inside of

the vehicle may become hot, causing damage to the portable audio player or cellular

phone.

488

RX450h_RX450hL_U

5-12. Other function

Go to “Information”: “MENU” button

 “Info”

Display the fuel consumption.
(

P. 127)

Display the “USB Photo” screen.
(

P. 490)

Display the Traffic Map picture.

Available when in a traffic supported

HD Radio coverage area

Display the weather information.
(

P. 492)

Go to “Traffic Map”: “MENU” button

 “Info”“Traffic Incidents”

Current position of your car
Traffic information line

The line color means the following:
Red: Heavy congestion
Yellow: Moderate traffic
Green: Free flowing traffic

“Information” screen

Display “Information” screen

Traffic information map

489

5-12. Other function

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

■

Certification for U.S. owners

490

5-12. Other function

RX450h_RX450hL_U

Go to “USB Photo”: “MENU” button

 “Info”  “USB1 Photo” or “USB2

Photo”

P. 409

Move the controller to the left to display the menu screen.

Change the full screen mode.
Select to set the slide show display
on/off.

Start the slide show at a selected folder.

Change the play speed.
Change the play mode.

Move the controller to the right and select “Browse”.
Select the desired folder, and then select a desired file to begin using the
selected folder.

USB photo

Connecting a USB memory device enables you to enjoy photo on the Lexus
Display Audio display.

USB photo screen

Connecting a USB memory device

Menu screen

3
4

Selecting a folder and a file

491

5-12. Other function

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

■

USB memory functions
P. 445

■

USB memory

●

Compatible devices
USB memory device that can be used for JPEG display.

●

Compatible device formats
The following device format can be used:
• USB communication format: USB2.0 FS (480 Mbps)

• File system format: FAT16/32 (Windows)

• Correspondence class: Mass storage class

●

JPEG file compatibility
• Compatible image size: Maximum 10MB

• Compatible pixel size: Maximum 10,000,000 pixels

NOTICE

■

To prevent damage to the USB memory device or its terminals
P. 447

492

5-12. Other function

RX450h_RX450hL_U

Go to “Weather”: “MENU” button

 “Info”  “Weather”

Select the desired city/location.

Current location of your car
Select of the recently checked
location list

Select the desired location on the

recently checked location list.

Select of the National City list.

Select the region on the region list

and then select the city on the

National City list.

Select of the local location list

Select the location on the local location list.

■

Select the time
Select “Current Weather” on the “Weather” screen.

Display the current weather infor-
mation.
Display the 3 days weather infor-
mation.

You can display detail of a week,

move the controller right and then

select the desired week.

Display the 6/12 hour weather information.

Weather information

Weather information for the selected city is displayed.
Available when in weather supported HD Radio coverage area

How to check the weather information

493

5-12. Other function

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

Press the talk switch.

To cancel the voice command system,

press and hold the talk switch.

After a beep sounds, say the desired
command.

On the list screen, you can select the

desired command.

■

Menu screen
To display the menu screen, move the controller to the left.

Voice command system

The voice command system enables the audio and hands-free systems to be
operated using voice commands.
Operations of the voice command system can be performed by selecting the
menu corresponding to each function on the right part of the screen. Even if
any menu is selected, commands displayed on all menus can be operated.

Using the voice command system



“Hints” screen



Except “Hints” screen

Offer examples of commands and operation methods
Adjust the settings for voice guidance volume and voice recognition
prompts. Select to train voice recognition. (“Hints” screen) (

P. 416)

Start over voice recognition (except “Hints” screen)
Cancel voice recognition

3
4

494

5-12. Other function

RX450h_RX450hL_U

■

Microphone
P. 462

■

When using the microphone

●

It is unnecessary to speak directly into the microphone when giving a command.

●

Wait for the confirmation beep before speaking a command.

●

Voice commands may not be recognized if:
• Spoken too quickly.

• Spoken at a low or high volume.

• The roof or windows are open.

• Passengers are talking while voice commands are spoken.

• The air conditioning speed is set high.

• The air conditioning vents are turned towards the microphone.

●

In the following conditions, the system may not recognize the command properly and

using voice commands may not be possible:
• The command is incorrect or unclear. Note that certain words, accents or speech

patterns may be difficult for the system to recognize.

• There is excessive background noise, such as wind noise.

■

When searching for a track

●

A USB memory or iPod must be connected to enable track searching and playback.

(

P. 409)

●

When a USB memory or iPod is connected, recognition data is created so tracks can

be searched using voice commands.

●

Recognition data is updated under the following conditions:
• When the USB memory or iPod data has changed.

• When the voice recognition language is changed. (

P. 413)

●

While the recognition data is being created or being updated, a track search cannot be

performed using a voice command.

■

The Gracenote

media database

495

5-12. Other function

xus
Dis
play Audi

o syst

RX450h_RX450hL_U

Content .. 28 29 30 31 ..