Lexus ES300 (2002 year). Manual - part 449

Lexus Special Service Campaign 1LG
                                                                                                                                              

23

4.  COMPLETE POSTCARD AND MAIL

(a)  After completing the postcard, make a copy of

it and staple it to the dealership copy of the
Repair Order. This will assure you are able to
provide the information in the future if the
postcard is not received by Lexus.

(b) Mail the 

Airbag Serial Number Registration

postcard

 to Lexus to assure it is properly

registered.

(c) 

Additional postcards, in packs of 50
(P/N 00410 − 92005), may be ordered
through the non−parts system on the TDN
system.

NOTE:
The VIN will not be preprinted on the
postcards ordered from the MDC.  Please
assure that the VIN is recorded on the
postcard.

5.  INSTALLING THE NEW STEERING WHEEL

PAD

(a)  Connect the 2 airbag connectors.
(b)  Install the new steering wheel pad after

confirming that the circumference groove of
the Torx



 screws are caught in the screw

case.

(c) Using a T30 Torx



 

socket, tighten the 2

screws.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)

(d) Reinstall the No. 2 and No. 3 covers.
(e) Reconnect the negative (−) battery terminal.

6.  CHECK SRS WARNING LIGHT

(a)  Turn ignition switch to the  ON  or  ACC

position and check that the SRS warning light
illuminates.

(b)  Verify that the SRS warning light goes out

after approximately 6 seconds.