|
|
|
125 The automatic light control system works when the light control SW is turned to AUTO. The automatic light control sensor Body ECU 9–Ground : Approx. 12 volts with ignition SW at ON or ST position 12, 24–Ground : Always continuity 1–Ground : Always approx. 12 volts D8 Door Courtesy SW Front LH 1–Ground : Driver’s door open : Parts Location Code See Page Code See Page Code See Page A18 B5 B J4 B4 A C11 : Relay Blocks Code See Page Relay Blocks (Relay Block Location) 1 Engine Room R/B (Engine Compartment Left) : Junction Block and Wire Harness Connector Code See Page Junction Block and Wire Harness (Connector Location) 1H Engine Room Main Wire and Engine Room J/B (Engine Compartment Left) 2B Instrument Panel Wire and Driver Side J/B (Lower Finish Panel) 2E Engine Room Main Wire and Driver Side J/B (Lower Finish Panel) 2F Engine Room Main Wire and Driver Side J/B (Lower Finish Panel) 2R Instrument Panel Wire and Driver Side J/B (Lower Finish Panel) : Ground Points Code See Page Ground Points Location IA Instrument Panel Reinforcement LH IB Instrument Panel Brace LH ID Instrument Panel Brace RH System Outline Service Hints |