DIRECTION INDICATOR LAMPS
H6
CIRCUIT OPERATION
1
CIRCUIT OPERATION
Hazard lamps
When the hazard warning switch is operated, all indi-
cator bulbs, side repeaters and the hazard switch
illumination bulb will operate at the specified rate,
regardless of the ignition switch position. The indica-
tor warning lamps within the instrument pack will
also operate under this condition.
If the inertia switch is operated and the ignition is on,
all indicator bulbs, side repeaters, warning lamps
and the hazard switch bulb will flash at the specified
rate.
In addition to the operation of the indicator bulbs
there will be an audible tick generated by the BeCM,
timed to match the bulb illumination in the instrument
pack.