|
|
General Information - Diagnostic Trouble Code (DTC) IndexDTC: Restraints Description and Operation • NOTE: If a control module or component is suspect and the vehicle remains under manufacturer warranty, refer to the • NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan • NOTE: When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal • NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests. • NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion. • NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may Description And Operation For a detailed description of the restraints control system, refer to the relevant Description and Operation section in the Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) (Description and Operation), Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) (Description and Operation). Restraints Control Module (RCM) DTC Description Possible Cause Action B0001-11 Driver Frontal Stage 1 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0001-12 Driver Frontal Stage 1 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0001-13 Driver Frontal Stage 1 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0001-19 Driver Frontal Stage 1 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0001-1A Driver Frontal Stage 1 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0001-95 Driver Frontal Stage 1 Deployment Control - Driver's airbag ignitor Check driver’s airbag ignitor (stage 1) B0002-11 Driver Frontal Stage 2 Deployment Control - Circuit Driver's airbag ignitor Refer to the electrical circuit diagrams B0002-12 Driver Frontal Stage 2 Deployment Control - Circuit Driver's airbag ignitor Refer to the electrical circuit diagrams B0002-13 Driver Frontal Stage 2 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0002-19 Driver Frontal Stage 2 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and B0002-1A Driver Frontal Stage 2 Deployment Control - Circuit Driver's airbag ignitor Refer to electrical circuit diagrams and |