Discovery 2. Manual - part 92
ENGINE MANAGEMENT SYSTEM - V8
REPAIRS 18-2-97
Switch - cruise control (set/resume)
$% 19.75.33
Remove
1. Remove the key from the starter switch.
Disconnect both battery leads, negative lead
first. Wait ten minutes before starting work.
2. Remove driver's airbag module.
3. Release remote control switches multiplug and
leads from steering wheel base.
4. Disconnect remote control switches multiplug
from harness.
5. Remove 2 screws securing remote control
switches to steering wheel base.
6. Release and remove remote control switches
from steering wheel.
Refit
1. Fit remote control switches to steering wheel
and secure with screws.
2. Connect remote control switches multiplug to
harness.
3. Secure leads and multiplug to base of steering
wheel.
4. Fit driver's airbag module.
Switch - clutch pedal - cruise control
$% 19.75.34
Remove
1. Remove 3 fasteners and move driver's side
lower closing panel aside.
2. Disconnect multiplug from clutch pedal switch.
3. Remove switch from pedal bracket.
Refit
1. Engage switch fully into pedal bracket location
and connect multiplug.
2. Position lower closing panel and secure with
fasteners.